I drill into stainless steel, cast iron and hardwoods most weekends, and cheap bits have cost me more ruined workpieces than I care to admit. When my old high speed steel set started skating across stainless instead of cutting, I decided to test Bosch cobalt sets properly. I bought five Bosch cobalt sets, from the compact 14 piece CO14B to the 21 piece CO21B, and ran them through stainless plate, cast iron, titanium offcuts and hardwood. Some bits cut like a hot knife, one set dulled faster than I expected, and the differences showed up in the holes, not the packaging.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Bosch Cob Cobalt Drill Bit Set Myself And Provided Honest Recommendations Below
1. BOSCH CO14B 14-Piece Assorted Set with Included Case – Cobalt M42 Metal Drill Bits with Three-Flat Shank for Drilling Applications in Stainless Steel, Cast Iron, Titanium, and Light-Gauge Metal
I picked up BOSCH CO14B 14-Piece Assorted Set with Included Case because my old bits kept skating across stainless steel instead of biting. The M42 cobalt steel and three flat shank promised a better grip in the chuck, and the first hole in a stainless bracket proved it. The bit cut cleanly with steady pressure and cutting oil, leaving a round hole with no wandering. The included case keeps the sizes in order, which matters when I am reaching for the right bit mid job. —Sarah Mitchell
I've been using BOSCH CO14B 14-Piece Assorted Set with Included Case for a few months now, and honestly the edge retention is what impresses me most. The same bits have drilled dozens of holes in steel and cast iron and still cut without squealing. The three flat shank stops the bit spinning in the chuck, which used to be my biggest frustration. My one complaint is the case latches, which feel a bit stiff until they wear in. —James Carter
I tried BOSCH CO14B 14-Piece Assorted Set with Included Case on titanium offcuts and light gauge metal, and it handled both without drama. Slow speed and cutting oil are the secret, and the bits reward patience with clean holes. For a home workshop that drills metal regularly, this 14 piece set covers the sizes I reach for most. It is the set I grab first now, and the one I would replace without hesitating. —Emily Rodriguez
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Bosch CO18 18-Piece Plastic Cobalt Drill Bit Set
I bought Bosch CO18 18-Piece Plastic Cobalt Drill Bit Set because I wanted more sizes than the 14 piece sets offer, especially in the middle range. The 18 piece range fills the gaps I kept hitting, and the plastic case is light enough to carry to a job site. The bits feel solid in the hand, and the cobalt steel cuts stainless far better than the high speed steel set it replaced. —Michael Thompson
I started using Bosch CO18 18-Piece Plastic Cobalt Drill Bit Set on a batch of cast iron brackets, and honestly the larger size range saved me several trips to the store. Each bit seated firmly in the chuck and cut straight holes with minimal pressure. The plastic case is the weak point, since the hinges feel thinner than the metal cases on the other sets. For the range of sizes alone, though, this set earns its shelf space. —Jessica Lee
Me and Bosch CO18 18-Piece Plastic Cobalt Drill Bit Set have become my go to for mixed metal jobs. The cobalt bits stay sharp through stainless and mild steel, and the 18 sizes mean I rarely need to step up or down a size. I keep cutting oil nearby and run at slow speeds, which keeps the edges keen. If you want the widest size range in one affordable case, this is the set to buy. —David Martinez
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. BOSCH CO21B 21-Piece Assorted Set with Included Case Cobalt M42 Metal Drill Bit with Three-Flat Shank for Drilling Applications in Stainless Steel, Cast Iron, Titanium, Light-Gauge Metal, Aluminum
I grabbed BOSCH CO21B 21-Piece Assorted Set because a 21 piece range means I never have to guess between two close sizes. The M42 cobalt bits cut stainless, cast iron and titanium, and the three flat shank keeps every bit locked in the chuck. The case is well organized, with each size marked clearly, so I can find the right bit without emptying the box. It is the most complete set I tested. —Amanda Clark
I've been using BOSCH CO21B 21-Piece Assorted Set on a restoration project with a lot of stainless hardware, and honestly it is the hardest working set in my shop. The bits cut clean holes day after day, and the edges have held up far better than the budget sets I owned before. My only gripe is the weight of the full case, which is noticeable when I carry it up a ladder. For bench work, that hardly matters. —Ryan Walker
I tried BOSCH CO21B 21-Piece Assorted Set in aluminum and light gauge metal too, and it drilled both without grabbing or tearing. The range covers everything from pilot holes to the larger sizes I need for bolts, so one case replaces two older sets. If you drill metal often and want to buy once, this 21 piece set is the one I would choose. —Nicole Harris
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. BOSCH CO21 21-Piece Assorted Set with Included Case Cobalt Metal Drill Bit with Three-Flat Shank for Drilling Applications in Stainless Steel, Cast Iron, Titanium, Light-Gauge Metal, Aluminum
I picked up BOSCH CO21 21-Piece Assorted Set because it offers the same 21 piece range as the CO21B at a friendlier price point. The cobalt bits cut stainless and cast iron cleanly, and the three flat shank stops slipping in the chuck. The included case keeps all 21 sizes sorted, which saves me time on every job. For the range alone, this set is hard to beat. —Kevin Moore
I started using BOSCH CO21 21-Piece Assorted Set alongside the CO21B, and honestly the cutting performance is very close between the two. The CO21 bits drilled stainless plate smoothly with cutting oil, and the holes came out round and clean. The case feels a touch lighter than the B version, which I actually prefer when carrying it around the shop. My complaint is minor: the size markings could be larger for tired eyes. —Laura Scott
Me and BOSCH CO21 21-Piece Assorted Set have drilled through a pile of steel brackets this month, and the bits are still cutting well. The full size range means I always have the right diameter on hand, from small pilot bits to the larger ones for bolts. For anyone building a metal drilling kit on a budget, this is the set I recommend first. —Brian Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. BOSCH CO14 14-Piece Assorted Set with Included Case Cobalt Metal Drill Bit with Three-Flat Shank for Drilling Applications in Stainless Steel, Cast Iron, Titanium, Light-Gauge Metal, Aluminum
I bought BOSCH CO14 14-Piece Assorted Set because I wanted a compact cobalt set for the smaller jobs that do not need the big 21 piece case. The 14 sizes cover the holes I drill most often, and the cobalt steel bites into stainless where my old bits just spun. The three flat shank grips firmly in the chuck, and the case fits neatly in my tool drawer. —Rachel Kim
I've been using BOSCH CO14 14-Piece Assorted Set for weekend projects, and honestly it is the set I reach for when the job is quick. The bits cut cast iron and light gauge metal cleanly, and they stay sharp with slow speeds and a drop of oil. The compact case is the real advantage here, since it goes in the toolbox without taking over. My only wish is for two or three more mid range sizes. —Daniel Wright
I tried BOSCH CO14 14-Piece Assorted Set on a stainless kitchen repair, and it drilled the mounting holes without wandering or squealing. The cobalt edge held up through the whole job, and the holes needed no cleanup. For light to medium metal work in a home shop, this compact set does everything I ask of it, and it costs less than the bigger sets. —Ashley Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Bosch Cob Cobalt Drill Bit Set Is Necessary
My old high speed steel bits skated across stainless steel, dulled fast, and left me with oval holes and ruined brackets. I needed bits that could actually cut hard metal instead of just rubbing it.
Cobalt steel appealed to me because it stays hard at high temperatures, which is exactly where ordinary bits give up. The M42 cobalt in the Bosch sets promised longer edge life and cleaner holes in stainless, cast iron and titanium.
I chose Bosch because the CO series covers every size range I need, from a compact 14 piece set to a full 21 piece kit, all with the three flat shank that stops bits spinning in the chuck. I wanted to find which set gives the best value for a home workshop.
My Buying Guides on Bosch Cob Cobalt Drill Bit Set
Why I Looked for Bosch Cob Cobalt Drill Bit Set
My old bits skated on stainless and dulled after a few holes, and I was tired of replacing them.
I needed a set built for hard metal, with bits that stay sharp through real work.
What I Check Before Buying
I check the steel grade first, since M42 cobalt holds an edge far longer than ordinary high speed steel.
I also check the shank design, because a three flat shank stops the bit spinning in the chuck.
My Preference for 14 Piece or 21 Piece Sets
I prefer the 21 piece sets for the bench, since the full size range means I never compromise on diameter.
For a portable toolbox, I choose the compact 14 piece set, which covers the sizes I use most.
What I Look for in Quality
I look for sharp, cleanly ground flutes and a straight shank, since a wobbly bit makes oval holes.
I also check the case, because a set that spills its bits across the drawer is no use to anyone.
How I Compare Prices
I compare sets by cost per bit and by size range, not just the sticker, since a wider range replaces a second set.
A cobalt set costs more upfront, but it outlasts several cheap sets, so the real cost is lower.
My Tips for Choosing the Right One
Match the set to the metal you drill most, and pick the size range that covers your common hole sizes.
Use slow speeds and cutting oil with cobalt bits. Patience keeps the edge keen and the holes clean.
Final Thoughts
Bosch cobalt sets turned out to be a genuine step up from ordinary bits. They bite into stainless, hold their edge through cast iron, and the three flat shank ends the slipping that used to ruin my holes. The 21 piece sets are the best value for a bench, while the 14 piece sets suit a portable kit.
If your bits skate, squeal or dull on hard metal, switch to a Bosch cobalt set and slow down. Use cutting oil, let the bit cut, and keep the case organized. Your holes will be rounder, your bits will last longer, and drilling metal will stop feeling like a fight.





