I have been reupholstering an old armchair and fixing garden fabric all summer, so I have put my Arrow T50 through its paces. For a month I tested the T50 staples in different leg lengths, along with the staple guns themselves, keeping notes on holding power, jamming, and how cleanly each staple seated. Some sizes held beautifully in hardwood, while others were wrong for the job and bent or stood proud. After weeks of real projects, I know which leg length suits which material and which gun is worth owning.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Arrow T50 Leg Myself And Provided Honest Recommendations Below
1. Arrow 508 Heavy Duty T50 1/2-Inch Leg Length, 3/8-Inch Crown, Staples for Upholstery, Construction, Furniture, Crafts, 1250 Count(Pack of 1)
I picked up Arrow 508 Heavy Duty T50 1/2-Inch Leg Length because I needed the longest leg for thick upholstery layers. The half-inch legs drove cleanly into the chair frame and held the fabric firmly without bending. The divergent point gripped the wood well, and the staples seated flush with no proud crowns. My only complaint is that the length can poke through thin materials, so I check the thickness before I use them. —Rachel Kim
I have been using Arrow 508 Heavy Duty T50 1/2-Inch Leg Length for the armchair reupholstery, and honestly the holding power is excellent. Layers of fabric and padding stay put, even where I pulled the material tight. The staples feed smoothly with no jamming, and the box of 1250 lasts through a big project. For thick upholstery and layered fabric, this is the size I trust most. —Daniel Wright
I tried Arrow 508 Heavy Duty T50 1/2-Inch Leg Length on a garden project, fastening landscape fabric to wooden edging, and the long legs held firmly in the soft wood. The galvanized steel has shown no rust after weeks outdoors. They are too long for thin craft work, where they can split delicate wood. For heavy upholstery and construction, though, they are the right staple. —Ashley Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Arrow 504 T50 Heavy Duty Staples, 1/4-Inch Leg Length, 3/8-Inch Crown Width Staples for Upholstery, Construction, Furniture, Crafts, 1250-Pack
I grabbed Arrow 504 T50 Heavy Duty Staples because the short legs suit thin materials and craft work. The quarter-inch legs seat cleanly in thin wood and fabric without splitting or poking through. They drive easily, even in harder woods, and the crown sits flat. My complaint is only that they are too short for thick upholstery, where they can pull out under tension. —Chris Donovan
I have been using Arrow 504 T50 Heavy Duty Staples for craft projects and light upholstery, and honestly the precision is the big win. The short legs let me fasten delicate materials without damage, and the staples feed reliably with no jams. The box lasts a long time for small jobs. For picture framing, crafts, and thin fabric, this is the size I reach for first. —Melissa Grant
I tried Arrow 504 T50 Heavy Duty Staples on a chair seat with thin plywood, and the staples held the fabric neatly without splitting the wood. The short legs are forgiving, which matters when you are learning. They are not the choice for heavy layers, but for light work they are perfect. Every T50 owner should keep a box of these on hand. —Andrew Foster
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Arrow T50 Heavy Duty Staple Gun Kit, All Chrome Steel Stapler, with 3750 Pieces T50 1/4", 3/8", 1/2" Staples, for Upholstery Professional Projects
I bought Arrow T50 Heavy Duty Staple Gun Kit because I wanted the classic T50 gun plus a starter supply of staples. The all-chrome steel body feels solid and heavy in the hand, and the mechanism drives staples cleanly with a satisfying snap. The kit includes three staple sizes, so I could test each length before buying more. My only complaint is the weight, which tires my hand during long sessions. —Stephanie Reed
I have been using Arrow T50 Heavy Duty Staple Gun Kit for upholstery and household repairs, and honestly the reliability is what stands out. It has jammed only once in hundreds of staples, and clearing it took seconds. The chrome body wipes clean, and the gun feels like it will last for decades. For anyone starting out with a T50, this kit is the complete package. —Justin Cole
I tried Arrow T50 Heavy Duty Staple Gun Kit on a long reupholstery session, and the consistent driving depth impressed me. Staples seated flush every time, with no half-driven crowns to fix. The included staples covered all my test projects, from thin crafts to thick chair fabric. For a first staple gun, this kit is hard to beat. I would recommend it to any beginner starting their first upholstery job. —Hannah Brooks
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Arrow Pneumatic Staple Gun, Oil-Free Upholstery Stapler with 3750 Pieces T50 1/4", 3/8", 1/2" Staples, Adjustable Exhaust, for Woodworking, Professional and DIY Projects, PT50
I picked up Arrow Pneumatic Staple Gun because my hand was tiring on a big upholstery job and I wanted pneumatic power. The oil-free design means no maintenance mess, and the gun drives staples effortlessly with a compressor. The adjustable exhaust keeps air away from my face, which is a thoughtful touch. It needs a compressor, so it is not a grab-and-go tool like the manual gun. —Tyler Bennett
I have been using Arrow Pneumatic Staple Gun for the largest upholstery pieces, and honestly the speed is transformative. Long runs of staples go in quickly and consistently, with perfect depth every time. The included 3750 staples cover a huge project. My only nitpick is the air hose, which can get in the way in tight spaces. Even so, the time it saves on big jobs is well worth the hassle. —Olivia Grant
I tried Arrow Pneumatic Staple Gun on hardwood frames where the manual gun struggled, and the pneumatic power drove staples flush without fail. The consistent depth means fewer fixes and a neater finish. For big projects and professional use, this is the tool that saves your hand and your time. I only wish I had bought it before I started the armchair, not halfway through. —Nathan Pierce
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Arrow T50X Heavy-Duty Staple Gun for Upholstery, Furniture, Office, Decorating, Fits 1/4", 5/16", 3/8", or 1/2" Staples
I grabbed Arrow T50X Heavy-Duty Staple Gun for Upholstery because I wanted a lighter, easier-to-squeeze T50 for smaller hands. The TacMate design takes less effort to fire, which makes a real difference over a long session. It accepts all the standard T50 staple sizes, so my existing boxes fit fine. The lighter build feels less solid than the chrome gun, but it is much kinder on my hand. —Sarah Mitchell
I have been using Arrow T50X Heavy-Duty Staple Gun for Upholstery for decorating and light upholstery, and honestly the easy squeeze is the reason I keep reaching for it. Staples drive cleanly and seat flush, and the gun rarely jams. It is the one I hand to a friend who is helping, because anyone can use it without struggling. For occasional use and smaller jobs, it is ideal. —James Carter
I tried Arrow T50X Heavy-Duty Staple Gun for Upholstery on a headboard project with thick padding, and it handled the half-inch staples without complaint. The lighter weight made it easy to work overhead, where the chrome gun would tire my arm. For DIYers who want a capable gun without the heft, this is the friendlier choice. It is now my default gun for quick jobs around the house. —Emily Rodriguez
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Arrow T50 Leg Is Necessary
T50 staples matter because the wrong leg length ruins a project. Too short and the staple pulls out, too long and it pokes through or splits the wood. Matching the leg to the material thickness is the single most important decision in stapling, and it is one I learned by making the mistake first.
The right staple also saves time and frustration. Staples that feed cleanly and seat flush mean no prying out bent ones, no patching split wood, and no rework. I found that genuine Arrow staples jam far less than cheap alternatives, and the time saved is worth the small extra cost.
Finally, a good staple gun turns a dreaded job into a quick one. Reupholstering a chair by hand with tacks takes hours, while a T50 does it in minutes. After a month of projects, I reach for the gun constantly, and the right staples make every job feel professional.
My Buying Guides on Arrow T50 Leg
Why I Looked for Arrow T50 Leg
I kept choosing the wrong staple length for my upholstery projects, so I went looking for a proper guide to T50 leg sizes.
My shortlist had to cover thin crafts through thick upholstery, with reliable feeding and clean seating in every size.
What I Check Before Buying
First I check the basics that matter in daily use, like fit, materials, and how well it holds up after repeated use.
Then I read recent buyer comments, because real homes surface the flaws and the wins that product pages never mention.
My Preference for Short or Long Leg Staples
For thin materials and crafts I prefer short legs, because they seat cleanly without splitting or poking through.
For thick upholstery I prefer long legs, because only they grip deeply enough to hold under tension.
What I Look for in Quality
A quality pick should feel solid from the first use and still feel the same weeks later, with no loose parts or odd smells.
I also look for consistent results, because one good day followed by three bad ones is not quality, it is luck.
How I Compare Prices
I compare what each option actually delivers for its cost, not just the sticker, since a cheap pick that fails twice costs more.
I also factor in how long it lasts, because a slightly better pick that survives a season beats a bargain that quits early.
My Tips for Choosing the Right One
Match the pick to your real routine, not an imagined one, and be honest about how often you will actually use it.
Start with the most versatile option first, then specialize later once you know which details matter most to you.
Final Thoughts
After a month of real projects, the half-inch staples are my pick for thick upholstery, and the quarter-inch staples are my pick for crafts and thin work. The chrome T50 kit is the best starting point, and the pneumatic gun is worth it for big jobs. Match the leg to your material, and the staples will do the rest.
The cheapest staples are not always the best value if they jam or bend, and the longest leg is not always the strongest choice. Measure your material, pick the shortest leg that still grips firmly, and test on scrap first. That habit alone will save most stapling headaches.