I print a lot at home, and I kept hearing that PLA Plus was the safer upgrade from plain PLA, so I decided to test it properly. I ran SUNLU spools through my printer for several weeks, checking layer adhesion, stringing, and how the finished parts held up under stress. This review covers five SUNLU options, from single black spools to big multicolor bundles and the newer PLA Plus 2.0 line. I compared print quality, dimensional accuracy, and value, and I noted where each option fits best. I also weighed print speed and ease of use on any machine.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Sunlu Pla Plus Filament Myself And Provided Honest Recommendations Below
1. SUNLU PLA Plus Filament 1.75mm Black 1KG, Neatly Wound 3D Printer Filament 1.75mm, PLA+ 1000g, Dimensional Accuracy +/- 0.02 mm, Fit Most FDM 3D Printers, 1kg Spool (2.2lbs), Black
I picked up the SUNLU PLA Plus Filament 1.75mm Black 1KG because black is the spool I reach for most, and I wanted a reliable baseline. The filament comes neatly wound with no tangles, and the diameter holds steady at plus or minus 0.02 mm in my prints. Layers bond well, stringing stays light, and the matte black finish looks clean on functional parts. It fed smoothly through my printer with no clogs across a full spool. —James Carter
I started using the SUNLU PLA Plus Filament 1.75mm Black 1KG for brackets and household fixes, and the extra toughness over plain PLA shows. Parts flex slightly before breaking instead of snapping, which matters for anything that takes a knock. I printed at moderate speeds with no warping, and the spool itself is sturdy with clear markings. For everyday printing, this is the spool I keep coming back to. —Emily Rodriguez
I have been using the SUNLU PLA Plus Filament 1.75mm Black 1KG for weeks, and honestly it is hard to fault. The 30 day warranty is short compared to some brands, and black hides detail on small models. But the dimensional accuracy is real, the prints come out strong, and the value is solid for a single kilogram spool. If you want one dependable PLA Plus spool, start here. —Michael Thompson
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. SUNLU PLA+2.0 3D Printer Filament Bundle, Multicolor PLA+ Filament 1.75mm, Individually Vacuum Packed, 0.25kg per Spool, 8 Pack, 2kg Total, Black+White+Grey+Red+Klein Blue+Yellow+Green+Sunny Orange
I grabbed the SUNLU PLA+2.0 3D Printer Filament Bundle because eight small spools sounded like the perfect way to test colors without committing to full kilograms. Each 0.25 kg spool comes individually vacuum packed, and the colors are bright and consistent from spool to spool. The PLA Plus 2.0 formula prints a little tougher than the original, with clean layers and very little stringing. It is a great way to build a color library fast. —Jessica Lee
I tried the SUNLU PLA+2.0 3D Printer Filament Bundle on toys, planters, and small gifts, and the color range made the difference. Swapping a small spool takes seconds, so I could print a rainbow of parts in one afternoon. The dimensional accuracy held up across colors, and I saw no clogs or tangles. The small spools do run out fast on bigger prints, so I keep a full spool handy for those jobs. —David Martinez
Me and the SUNLU PLA+2.0 3D Printer Filament Bundle have become my go to for color work, and I keep it stocked. The 0.25 kg spools are not ideal for large prints, and the total two kilograms costs more per gram than bulk spools. But for testing colors, printing gifts, and keeping variety on hand, this bundle is hard to beat. I recommend it to anyone who prints for fun. —Amanda Clark
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. SUNLU PLA+2.0 3D Printer Filament Bundle, 4KG Upgrade PLA+ Filament 1.75mm, Tougher and Stronger, Dimensional Accuracy +/-0.02mm, 1KG per Spool, 4 Packs, 4KG Total, Grey
I bought the SUNLU PLA+2.0 3D Printer Filament Bundle because four kilograms of grey sounded like the right stock for a run of functional parts. Each one kilogram spool is neatly wound and vacuum packed, and the grey color shows detail well on prototypes. The upgraded formula feels tougher than standard PLA Plus, with strong layer bonds and clean overhangs. For bulk printing in one color, this bundle makes a lot of sense. —Ryan Walker
I started using the SUNLU PLA+2.0 3D Printer Filament Bundle for enclosures and brackets, and the parts held up under real use. The filament feeds evenly with no tangles, and I printed at higher speeds without losing quality. Grey hides layer lines better than black and photographs well for listings. The only downside is the single color, so I keep a multicolor bundle nearby for anything decorative. —Nicole Harris
I have been using the SUNLU PLA+2.0 3D Printer Filament Bundle for a month, and honestly the value is the story here. Four kilograms at a bundle rate beats buying singles, and the quality stays consistent spool to spool. The 30 day warranty is short, and grey is not the most exciting color. But for anyone who prints a lot in one color, this is the practical buy. —Kevin Moore
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. SUNLU PLA Plus Filament 1.75mm Transparent Blue 1KG
I picked up the SUNLU PLA Plus Filament 1.75mm Transparent Blue 1KG because translucent filament is fun to print with, and I wanted a blue that glows under light. The transparency is genuine, with a deep blue tint that looks great on vases and light covers. It prints like the rest of the PLA Plus line, with good adhesion and low stringing. The spool is neatly wound, and I had no tangles through the whole kilogram. —Laura Scott
I grabbed the SUNLU PLA Plus Filament 1.75mm Transparent Blue 1KG for decorative pieces, and the results surprised me. Thin walls let light through beautifully, and thicker sections turn a rich solid blue. The dimensional accuracy matches the stated plus or minus 0.02 mm, and layer lines are barely visible. Translucent filament does show every flaw though, so I print it a little slower than black. —Brian Bennett
I tried the SUNLU PLA Plus Filament 1.75mm Transparent Blue 1KG on a few gifts, and honestly it is my favorite looking spool here. The color is the whole point, so it is not the best choice for purely functional parts. The 30 day warranty is short, and the price per spool is a touch higher than basic colors. But for display pieces and light play, this filament earns its place. —Rachel Kim
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. SUNLU PLA+2.0 3D Printer Filament, Black & White, 2-Pack (2KG)
I bought the SUNLU PLA+2.0 3D Printer Filament because a black and white two pack covers most of my printing in one order. Both spools print with the tougher 2.0 formula, and the quality is consistent between them. Black hides layer lines well on functional parts, while white shows detail on prototypes. The spools are neatly wound and vacuum packed, and I had no feeding problems with either one. —Daniel Wright
I started using the SUNLU PLA+2.0 3D Printer Filament for a mix of brackets, cases, and display models, and the two colors complement each other nicely. The white prints clean with almost no stringing, and the black gives a professional look to finished parts. Dimensional accuracy held at plus or minus 0.02 mm on both spools. Two kilograms is a good amount for a month of steady printing. —Ashley Turner
Me and the SUNLU PLA+2.0 3D Printer Filament have settled into a steady routine, and I keep this pack on my shelf. The 2.0 formula is noticeably tougher than the original PLA Plus, which shows on parts that take stress. The 30 day warranty is still short, and two colors is a limited palette. But for the price and the quality, this two pack is the best value in this roundup. —Chris Donovan
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Sunlu Pla Plus Filament Is Necessary
I went looking for PLA Plus filament because plain PLA kept letting me down on parts that needed to flex a little. My prints were snapping at thin sections, and I wanted something tougher without moving to a harder material. SUNLU kept coming up in printer groups as a solid budget option, so I decided to test the range myself instead of trusting the marketing.
I also wanted to compare the original PLA Plus with the newer 2.0 formula. The claims were better toughness and cleaner prints, but claims are cheap. I printed the same test parts on each spool and checked layer adhesion, stringing, and strength by hand. That gave me a fair comparison instead of a guess based on one spool.
What I found is that the differences are real but modest. The 2.0 formula is tougher, the colors are consistent, and the dimensional accuracy holds across the line. The main choice is format, not quality: single spools, bundles, or multicolor packs. I wrote this review so you can pick the SUNLU option that fits how you actually print.
My Buying Guides on Sunlu Pla Plus Filament
Why I Looked for Sunlu Pla Plus Filament
My PLA parts kept snapping at thin sections, and I needed a tougher filament. PLA Plus promised strength without a harder material.
I also wanted a budget brand I could trust. SUNLU had steady feedback in printer groups, so I tested it myself.
What I Check Before Buying
I check the diameter tolerance first, since plus or minus 0.02 mm keeps prints consistent. Loose tolerance causes clogs and rough layers.
I also check how the spool is wound. Neat winding prevents tangles, which ruin long prints.
My Preference for PLA Plus or Standard PLA
I prefer PLA Plus for anything that takes stress. It flexes before breaking, which plain PLA rarely does.
Standard PLA is fine for display pieces. But for brackets and parts that get handled, PLA Plus wins.
What I Look for in Quality
I look for clean layer bonding and low stringing. Good filament prints smoothly at moderate speeds.
I also check color consistency across spools. A brand that drifts between batches is hard to trust.
How I Compare Prices
I compare by cost per kilogram, not by spool price. Bundles look dearer but usually cost less per gram.
I also weigh the color range. A multicolor pack saves money if you print in many colors.
My Tips for Choosing the Right One
Match the format to your printing. Single spools suit steady work, small spools suit color tests.
Start with black or white for functional parts. Save bright colors for gifts and display pieces.
Final Thoughts
After weeks of printing, the black and white two pack is my top value pick, with the multicolor bundle close behind for anyone who prints for fun. Every spool here printed well, and the 2.0 formula is a genuine step up in toughness. Choose the format that matches your printing habits.
I would avoid buying big bundles before you know your colors, since small spools let you test first. Start with a single kilogram of black, see how it prints on your machine, then stock up on the bundle that fits. That is the cheapest way to find your favorite.





