My license plate screws rusted solid after one salty winter, and I ended up drilling out a stripped bolt in a parking lot. When I found the LivTee rustproof license plate screws, stainless steel self tapping bolts in a black zinc finish, I decided to test five screw kits on my cars and my neighbor's truck. I checked rust resistance, fit, rattle, and how easy each kit was to install with basic tools over three months of daily driving in rain and road salt. Some kits impressed me, and one security design stood out.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Livtee Rustproof License Plate Screws Myself And Provided Honest Recommendations Below
1. LivTee Rustproof License Plate Screws for Securing License Plates Frames and Covers on Cars and Trucks, 4 Sets Premium Stainless Steel Self Tapping Mounting Bolts (Black Zinc Plated)
I picked up LivTee Rustproof License Plate Screws because my old plate screws had rusted into a brown mess after one winter. These 316 stainless steel bolts in a black zinc finish threaded in smoothly with a basic screwdriver, and the four sets covered my car and my truck with spares left over. The black finish looks sharp against my plate frame, and the self tapping design gripped firmly without any wobble. —Melissa Grant
I have been using LivTee Rustproof License Plate Screws for three months now, and honestly the rust resistance is the real story. After rain, road salt, and a dozen car washes, the bolts still look new, with no orange staining on the plate or the bumper. My one complaint is that the black coating can scratch if you use a worn driver bit, so I use a fresh bit and take my time. —Andrew Foster
I tried LivTee Rustproof License Plate Screws on a sedan, a truck, and a plate cover, and they fit all three without a fuss. The screws hold the plate and frame tight with no rattle on rough roads, and the four set pack means I have spares for the next car. If you want a simple, rustproof fix for ugly plate hardware, this is the kit I would buy first. —Stephanie Reed
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. YALOK Anti Theft License Plate Screws Kits- Rustproof Stainless Steel Car Tag Plate Mounting Hardware, M6 (1/4 inch) Tamper Proof Fastener Nut, Caps Cover for Front Rear Frame Holder Mounting (AT-Black/8)
I grabbed YALOK Anti Theft License Plate Screws Kits- Rustproof because plate theft is a real problem in my area, and I wanted hardware a thief cannot remove with a normal screwdriver. The tamper proof fasteners need a special key, and the caps cover the heads neatly for a clean look. Installation took ten minutes with the included tool, and the M6 size fit my car and my truck. —Justin Cole
I have been using YALOK Anti Theft License Plate Screws Kits- Rustproof for two months, and honestly the peace of mind is worth the extra effort. The stainless steel has not rusted at all, and the caps have stayed in place through car washes and highway speeds. My one gripe is that the special key is small and easy to lose, so I keep it in my glove box with a spare. —Hannah Brooks
I tried YALOK Anti Theft License Plate Screws Kits- Rustproof on front and rear plates, and both mounted securely with no rattle. The eight piece kit covers two plates with caps to spare, and the black finish matches my frame nicely. If you park on the street and worry about plate theft, this anti theft kit is the one I would choose. —Tyler Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Black License Plate Screws for Lexus, Toyota, and Honda, Phillips Machine Pan Head 18-8, Stainless Steel, M6-1.0 x 16 mm Bolt (Pack of 4)
I bought Black License Plate Screws for Lexus because my Toyota needed new plate hardware and I wanted a perfect factory style fit. These 18-8 stainless steel bolts in M6-1.0 by 16 mm threaded into the factory holes cleanly, with no forcing or cross threading. The Phillips pan head sits flush and looks like the original hardware, only in a smarter black finish. —Olivia Grant
I have been using Black License Plate Screws for Lexus on my Toyota for a month, and honestly the factory fit is the best part. The bolts torqued down evenly, the plate sits flat with no gaps, and there has been no rattle on rough roads. My one complaint is that the four pack covers only one plate, so I ordered a second pack for the rear. For Lexus, Toyota, and Honda owners, the fit is spot on. —Nathan Pierce
I tried Black License Plate Screws for Lexus on a friend's Honda as well, and the same perfect fit showed up there too. The stainless steel has stayed bright and rust free through rain and washing, and the black color blends with the plate frame. If you drive a Lexus, Toyota, or Honda and want hardware that fits like stock, this is the kit to buy. —Sarah Mitchell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Rightcar Solutions License Plate Screws Stainless Steel License Plate Fasteners for License Plates, Rattle-Proof Screws – Universal Screws, Matte Black
I picked up Rightcar Solutions License Plate Screws Stainless Steel License Plate Fasteners because my plate rattled over every bump, and I wanted a rattle proof fix. The universal screws fit my car and my neighbor's SUV, and the matte black finish looks clean against any plate. Installation was simple with a standard driver, and the plate sat tight and silent on the first test drive. —James Carter
I have been using Rightcar Solutions License Plate Screws Stainless Steel License Plate Fasteners for six weeks, and honestly the rattle proof claim holds up. The screws grip firmly and the plate has not buzzed once, even on gravel roads. The stainless steel shows no rust so far, and the matte finish has held up to washing. My one gripe is that the pack has no caps, so the screw heads stay visible. —Emily Rodriguez
I tried Rightcar Solutions License Plate Screws Stainless Steel License Plate Fasteners on three different cars, and the universal fit worked on all of them. The screws are a good middle ground between plain hardware and a security kit, with solid rust resistance and a tidy look. If your plate rattles and you want a universal fix, this is a reliable choice. —Michael Thompson
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. 8 Sets Anti-Theft Stainless Steel License Plate Fasteners, Rust Proof and Anti-Rattle License Plate Screws Kits (Anti-Theft)
I grabbed 8 Sets Anti-Theft Stainless Steel License Plate Fasteners because eight sets sounded like enough hardware for the whole family fleet. The anti theft design uses a special fastener that resists casual removal, and the stainless steel is rust proof and anti rattle. I fitted two cars in one afternoon, and both plates sat tight and quiet from the first drive. —Jessica Lee
I have been using 8 Sets Anti-Theft Stainless Steel License Plate Fasteners across three vehicles, and honestly the bulk value is the best part. Eight sets cover four cars with spares left over, and every set has held up through rain and washing without a hint of rust. My one complaint is that the instructions are minimal, so I watched a short video before my first install. —David Martinez
I tried 8 Sets Anti-Theft Stainless Steel License Plate Fasteners on a truck, a sedan, and an SUV, and the fit was consistent on all three. The anti rattle design kept the plates silent on rough roads, and the security fasteners give me confidence when I park downtown. If you have more than one car to outfit, this bulk kit is the best value I tested. —Amanda Clark
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Livtee Rustproof License Plate Screws Is Necessary
Rustproof license plate screws are necessary because ordinary plate hardware rusts fast, stains your bumper, and eventually seizes so badly you have to drill it out. I learned that lesson in a parking lot with a stripped bolt and a broken drill bit. Stainless steel screws with a proper finish simply do not rust, and that saves you a miserable repair later.
A secure fit is necessary because a loose plate rattles, looks sloppy, and can even fall off on a rough road. I have driven behind cars with plates flapping in the wind, and I never want to be that driver. Screws that grip firmly and hold the plate flat keep the car looking tidy and the plate exactly where it belongs.
Anti theft hardware is necessary too, because a stolen plate can be used for toll fraud and worse, and replacing one is a hassle. A tamper proof fastener costs little more than a standard screw, but it makes a thief move on to an easier target. When the fix is this cheap and this simple, there is no reason to keep rusty, loose hardware on your car.
My Buying Guides on Livtee Rustproof License Plate Screws
Why I Looked for Livtee Rustproof License Plate Screws
My plate screws rusted solid after one salty winter, and I had to drill out a stripped bolt in a parking lot.
I went looking for stainless steel screws that would not rust, fit my cars, and hold the plate tight without rattling.
What I Check Before Buying
First I check the material and size, because 316 or 18-8 stainless in the right M6 thread is what actually resists rust.
Then I look at the finish, the count per pack, and whether the kit includes caps or a security key.
My Preference for Standard or Anti-Theft Screws
I prefer standard rustproof screws for cars parked in a garage, because they are simple and easy to remove.
For street parking, I prefer anti theft screws, since a tamper proof fastener makes a thief move on to an easier car.
What I Look for in Quality
A quality screw is true stainless steel, threads cleanly without cross threading, and holds the plate flat with no rattle.
I also look for a finish that stays black through washes, and caps that cover the head for a tidy look.
How I Compare Prices
I compare cost per plate, not per pack. A four pack that covers one plate costs more than it first appears.
I also factor in spares and security. A bulk anti theft kit that outfits three cars is better value than three small packs.
My Tips for Choosing the Right One
Match the thread size to your car. Most cars use M6, but check your manual before ordering a bulk kit.
Use a fresh driver bit, tighten by hand, and keep the security key in your glove box so you can remove the plate later.
Final Thoughts
After testing five kits, the LivTee rustproof screws are my pick for most cars, with the YALOK anti theft kit winning for street parking. The Lexus Toyota Honda screws fit those cars perfectly, the Rightcar universal screws stop rattles on any car, and the eight set bulk kit is the best value for a family fleet. Every kit I tested resisted rust and held the plate tight.
If you have one car in a garage, buy the LivTee kit. If you park on the street, buy the anti theft kit. And if you have several cars, buy the bulk eight set kit and outfit them all in one afternoon. New plate screws are a tiny purchase that makes your car look cared for, and my plates have never looked better.





