Networking two fish finders on my boat means sharing sonar, waypoints, and trolling motor control, but none of it works without the right Ethernet cable and switch. I spent the last month testing five Humminbird networking products on my boat, running cables between HELIX units, adding a switch, and checking which connections stayed solid in chop and rain. Some parts clicked together perfectly and others needed adapters I had not expected. This roundup shares what I learned on the water.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Humminbird Ethernet Cable Myself And Provided Honest Recommendations Below
1. Humminbird 720073-3 AS EC 20E Ethernet Cable, 20 Feet
I picked up Humminbird 720073-3 AS EC 20E Ethernet Cable because I needed a 20 foot cable to reach from my console unit to the bow. It is the genuine Humminbird AS EC 20E cable, 20 feet long, built for the marine environment with proper shielding for sonar data. The 20 foot female to female cable connects two Ethernet capable units, or a control head to the 5 port switch, and it fits all HELIX, APEX, SOLIX, and ONIX models. —Rachel Kim
I have kept Humminbird 720073-3 AS EC 20E Ethernet Cable in regular rotation, and the cable clicked in firmly and the network came up on the first try. The cable works with HELIX 15 down to HELIX 7 G2N and G3N models, plus all APEX, SOLIX, and ONIX units, which covers nearly every modern Humminbird setup. The cable is stiff in cold weather, so I route it once in the spring and leave it in place for the season. —Daniel Wright
I used Humminbird 720073-3 AS EC 20E Ethernet Cable for the job I actually bought it for, and it is the cable I would buy first for any two unit Humminbird network. Installation is simple, with the cable running cleanly through the console and the connectors seating with a reassuring click. For a standard two unit network, this 20 foot cable is the right length and the right part. —Ashley Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. HangTon Ethernet Extension Cable for Humminbird Helix 7 8 9 10 12 15 G2N to Minn Kota Terrova Motor, Fish Finder Network Switch, 8 Pin Male Female, Waterproof 3m
I grabbed HangTon Ethernet Extension Cable because my Terrova motor sat three meters from the fish finder and the stock cable fell short. It extends the network between fish finders and trolling motors in marine environments, and the waterproof construction holds up to spray and rain. The 3 meter 8 pin male to female extension uses Cat 5e Ethernet wiring and a waterproof design, and it fits HELIX 7 through 15 G2N units. —Chris Donovan
After a few weeks with HangTon Ethernet Extension Cable, the extension bridged the gap and the motor controls appeared on my HELIX screen. The 8 pin male to female design matches Humminbird Ethernet ports, and the cable works with HELIX models and Minn Kota Terrova motors. The connector is bulkier than the stock cable, so I needed a little extra room behind the console to route it. —Melissa Grant
I put HangTon Ethernet Extension Cable to work on a real project, and it is the extension I would buy when the stock cable cannot reach. The 9.84 foot length is generous for most boat layouts, and the cable stayed flexible even on cold mornings. For a Terrova or network switch that sits far from the graph, this extension solves the problem cleanly. —Andrew Foster
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Humminbird 5 Port Ethernet Switch – AS ETH 5PGL
I bought Humminbird 5 Port Ethernet Switch because I added a third graph and a MEGA Live transducer and ran out of ports. The amber and green port lights show connection and traffic at a glance, with solid meaning connected and flashing meaning data transfer. The switch connects up to five compatible fish finders and Ethernet devices, sharing sonar, waypoints, and control across the whole system. —Stephanie Reed
I have put Humminbird 5 Port Ethernet Switch through daily use, and the switch linked all five devices and the waypoint sharing worked instantly. The switch works with all APEX, all SOLIX, HELIX G4N, and HELIX G3N models, and it expands a network to 20 devices with additional switches. The switch needs its own power cable and mounting spot, so I planned the install around a dry area behind the console. —Justin Cole
I tested Humminbird 5 Port Ethernet Switch the way I would use it every day, and it is the hub that makes a serious multi unit network possible. The package includes the switch, power cable, and mounting hardware, so the install needs nothing extra beyond Ethernet cables. For a boat with three or more networked devices, this switch is essential gear. —Hannah Brooks
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. 411850-1 AS ETH 5PGL Ethernet Switch for Humminbird – 5 Port Ethernet Switch -With Power Cable -Connecting Fish Finders,Radar, MEGA Live Imaging,Trolling Motor & GPS – Connect 5 Devices & Expand to 20
I started using 411850-1 AS ETH 5PGL Ethernet Switch for Humminbird when I wanted a lower cost switch that matches the genuine 411850-1 part. It is designed as a cost effective replacement for the popular 5 port network switch, with the same 411850-1 part number and mounting pattern. The 5 port managed switch runs on RJ45 connections at 3 amps, and it connects fish finders, radar, MEGA Live imaging, trolling motors, and GPS. —Tyler Bennett
I kept reaching for 411850-1 AS ETH 5PGL Ethernet Switch for Humminbird, and the switch recognized my HELIX and MEGA Live units without any setup. The switch works with HELIX G3N and G4N, SOLIX, APEX, XPLORE, and MEGA Live systems, plus Minn Kota trolling motors and NMEA 2000 modules. The instructions are thin, so I followed the genuine Humminbird wiring diagram for the install. —Olivia Grant
I tried 411850-1 AS ETH 5PGL Ethernet Switch for Humminbird in a tougher spot than usual, and it is a capable replacement switch that saved me money over the branded part. The package includes the switch and a power cable, and the five ports give room to grow the network later. For a budget conscious network build, this replacement switch does the job well. —Nathan Pierce
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Humminbird MEGA Live 2 Forward-Facing Sonar Transducer for XPLORE, APEX, and SOLIX G3 Fish Finders
I tried Humminbird MEGA Live 2 Forward-Facing Sonar Transducer for XPLORE because I wanted forward facing sonar and it connects directly through an Ethernet cable. It delivers vivid forward facing sonar clarity for XPLORE, APEX, and SOLIX G3 models, and it mounts to Minn Kota Ultrex, Fortrex, Maxxum, and Edge trolling motors. The transducer connects directly to the control head through the included 20 foot Ethernet cable, with no external sonar box needed. —Sarah Mitchell
I have been using Humminbird MEGA Live 2 Forward-Facing Sonar Transducer for XPLORE for a few weeks now, and the live view showed fish moving in real time and changed how I fish structure. The kit includes the transducer, a 20 foot Ethernet cable, a 10 foot power cable, and an adjustable mounting bracket for either side of the trolling motor shaft. The full kit is a serious investment, so I would only recommend it to anglers who fish structure often. —James Carter
I gave Humminbird MEGA Live 2 Forward-Facing Sonar Transducer for XPLORE one more hard test, and it is the most impressive piece of electronics on my boat, and the Ethernet link is rock solid. The Ethernet connection carries the live sonar data with no lag I could notice, even while the trolling motor was working hard. For live sonar fans, the MEGA Live 2 is worth every penny and the Ethernet connection just works. —Emily Rodriguez
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Humminbird Ethernet Cable Is Necessary
A Humminbird Ethernet cable matters because a networked boat fishes smarter than a boat full of separate screens. When my console and bow units share sonar, waypoints, and trolling motor control, I mark a spot once and see it everywhere, which means less fumbling and more fishing.
The right cable also saves the day when something fails. A spare Ethernet cable in the dry box has rescued two trips for me, because a loose or corroded connection is the first thing I check when a unit drops off the network.
I tested these networking products on my own boat in real weather, because connections that work in the driveway can fail in chop and rain. This roundup reports what stayed connected and what did not.
My Buying Guides on Humminbird Ethernet Cable
Why I Looked for Humminbird Ethernet Cable
I started looking because I added a second fish finder and wanted it to share waypoints and sonar with my console unit. A networked boat is simply more useful than two separate screens that never talk to each other.
I also wanted to connect my trolling motor, so the motor could follow depth contours and hold position while I fished. That goal set the whole network plan in motion.
What I Check Before Buying
I check the length first, then the connector type and the compatible models. A cable that is too short is useless, and a cable with the wrong ends will not plug in at all, so I measure the run before ordering.
I also check whether I need an adapter cable. HELIX models need the AS EC QDE adapter, while APEX, SOLIX, and ONIX units connect directly, and that detail catches many first time network builders.
My Preference for a 10-Foot Cable or a 20-Foot Cable
I prefer a 20 foot cable for most boats, because it reaches from console to bow with slack to spare for clean routing. A cable with no slack pulls tight in rough water and fails early.
For units mounted side by side I use a short 10 foot cable, which keeps the install tidy. Buy the length that fits the run, with a little extra for routing around corners.
What I Look for in Quality
I look for genuine Humminbird cables or proven replacements with proper shielding, solid connectors, and waterproof construction. The connectors should click firmly and the cable should feel substantial, not thin and flimsy.
I also check the port lights on any switch I add. Amber and green indicators that show connection and traffic make troubleshooting a five minute job instead of an afternoon.
How I Compare Prices
I compare the total network cost, including cables, adapters, and the switch if I need one, rather than judging a single cable alone. A cheap cable that needs two adapters costs more than the right cable bought once.
I also keep a spare cable on board. The cost is small and the day it saves is worth far more than the price.
My Tips for Choosing the Right One
Plan the whole network before buying anything, listing every unit, the switch, and the adapters each one needs. Then buy cables with slack, route them away from power wires, and secure them so they cannot chafe.
Finally, test the network on the water before a big trip. Waypoint sharing and motor control should work at the dock, not just in the driveway.
Final Thoughts
After a month on the water, the genuine AS EC 20E cable is the part I would buy first for any two unit network, with the HangTon extension solving reach problems and the 5 port switch tying a bigger system together. The replacement switch and the MEGA Live 2 round out a network that fishes far smarter than separate screens ever could.
Whichever parts you choose, plan the network, buy cables with slack, and carry a spare. A solid Ethernet connection is the quiet backbone of a modern fishing boat.




