I bake sheet cakes for birthdays, potlucks, and family gatherings, and my old pan was warping and browning unevenly. I wanted a sturdy anodized aluminum pan that heats evenly, releases cleanly, and holds up to years of use. I tested three Fat Daddios sheet cake pans in different depths, baking the same recipes in each one and comparing the rise, the crust, and the cleanup. Each pan went through chocolate cake, vanilla sponge, and a tray of brownies before I made up my mind about which depth I reach for most often.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Fat Daddios Pob Anodized Aluminum Sheet Cake Pan Myself And Provided Honest Recommendations Below
1. Fat Daddio's POB-9134 Anodized Aluminum Sheet Cake Pan, 9 x 13 x 4 Inch
The Fat Daddio's POB-9134 Anodized Aluminum Sheet Cake Pan is the deepest pan I tested, and that extra inch makes a real difference. Tall layer cakes and deep brownies bake evenly without spilling over the rim, and the 16 gauge aluminum heats fast and steady. The anodized surface releases cakes cleanly with just a light greasing, and the pan feels solid and straight in hand. For big family bakes, this is the pan I want. —Chris Donovan
In the oven, the Fat Daddio's POB-9134 Anodized Aluminum Sheet Cake Pan held its shape perfectly at high heat, with no warping or twisting. My chocolate cake rose evenly from edge to center, and the crust came out golden without dark spots. The straight sides make layering and frosting easy, and the pan cleans up fast with warm soapy water. After months of weekly baking, it still looks and performs like new. —Melissa Grant
What I like most about the Fat Daddio's POB-9134 Anodized Aluminum Sheet Cake Pan is the versatility that comes with the four inch depth. It handles deep sheet cakes, tall brownies, and even lasagna when I need a sturdy baking dish. The anodized finish resists rust and staining, and the pan stacks neatly with my other bakeware. If you bake big and often, this is the depth I would buy first. —Andrew Foster
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Fat Daddio's POB-9133 Anodized Aluminum Sheet Cake Pan, 9 x 13 x 3 Inch
The Fat Daddio's POB-9133 Anodized Aluminum Sheet Cake Pan is the classic three inch depth, and it is the size I use most often. It bakes a standard sheet cake with a beautiful even rise, and the anodized aluminum spreads heat so the edges never overbake. The pan feels light but sturdy, and the straight sides give my cakes clean edges. For everyday baking, this depth hits the sweet spot. —Stephanie Reed
I baked vanilla sponge, chocolate cake, and brownies in the Fat Daddio's POB-9133 Anodized Aluminum Sheet Cake Pan, and every batch came out evenly baked. The anodized surface released each cake with just a light greasing and a dusting of flour, and cleanup took minutes. The pan stayed flat and true through repeated heating and cooling, with no sign of warping. It is the reliable workhorse of my baking shelf. —Justin Cole
What I value about the Fat Daddio's POB-9133 Anodized Aluminum Sheet Cake Pan is how well it fits standard recipes. Most sheet cake recipes are written for a 9 by 13 pan, and this depth handles them exactly as written. The pan is easy to store, easy to clean, and tough enough for weekly use. If you only buy one sheet cake pan, this three inch depth is the one I would choose. —Hannah Brooks
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Fat Daddios Sheet Cake Pan, 9 x 13 x 2 Inch, Anodized Aluminum with a Lumintrail Measuring Spoon Set
The Fat Daddios Sheet Cake Pan in the two inch depth is the shallowest I tested, and it shines for brownies and thin sheet cakes. The anodized aluminum heats quickly and evenly, giving my brownies a crisp edge and a fudgy center. It comes with a Lumintrail measuring spoon set, which is a handy bonus for baking. The pan feels solid, and the low sides make it easy to slide a spatula under each slice. —Tyler Bennett
In the oven, the Fat Daddios Sheet Cake Pan baked evenly from edge to center, with no hot spots or warping. My vanilla sponge rose flat and level, which made frosting a breeze. The anodized surface released the cake cleanly, and a quick soak took care of any sticky spots. The included measuring spoons are sturdy and accurate, and I reach for them as often as the pan itself. —Olivia Grant
What I like about the Fat Daddios Sheet Cake Pan is the value of getting a good pan plus a useful spoon set in one box. The shallow depth suits brownies, blondies, and thin cakes, and it also works well for roasting vegetables when I need a sturdy tray. It cleans up easily and stacks neatly with my other pans. For bakers who want a solid pan and a handy extra, this is a smart buy. —Nathan Pierce
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Fat Daddios Pob Anodized Aluminum Sheet Cake Pan Is Necessary
I bake often, and a warped pan ruins a cake faster than a bad recipe. My old sheet pan had started browning the edges while the center stayed pale, and the bottom had a wobble that made it rock on the counter. I wanted an anodized aluminum pan from a brand bakers trust, in a size that fits standard recipes. That search led me to test three Fat Daddios depths side by side.
Even heating mattered most to me, since a pan with hot spots bakes one side dark and the other raw. I looked for thick gauge aluminum, an anodized finish that releases cleanly, and straight sides that make frosting easy. I also wanted a pan that stays flat through hundreds of heating cycles. Those are the qualities I tested in every pan in this review.
Depth was the other question, since a two inch pan and a four inch pan bake very differently. I wanted to know which depth suits everyday sheet cakes, which one handles tall layer cakes, and which one is best for brownies. I baked the same recipes in all three pans and compared the results closely. The differences were clear, and the winner depends on how you bake.
My Buying Guides on Fat Daddios Pob Anodized Aluminum Sheet Cake Pan
Why I Looked for Fat Daddios Pob Anodized Aluminum Sheet Cake Pan
My old pan warped and browned unevenly, so I wanted a sturdy anodized pan I could trust.
Fat Daddios kept coming up in baking forums, so I decided to test three depths myself.
What I Check Before Buying
I check the gauge first, since thicker aluminum heats evenly and resists warping over time.
I also check the finish and the depth, because both decide how a cake bakes and releases.
My Preference for Sheet Pans or Round Pans
I prefer sheet pans for birthdays and gatherings because one pan feeds a crowd with easy slices.
Round pans suit layer cakes, but sheet pans are the workhorses I reach for most often.
What I Look for in Quality
I look for straight sides, an even finish, and a pan that stays flat after many bakes.
Good quality shows when a cake releases cleanly and the pan cleans up without scrubbing.
How I Compare Prices
I compare gauge, finish, and depth before I judge whether a pan is worth its cost.
A cheap thin pan that warps costs more in ruined cakes than a solid pan ever will.
My Tips for Choosing the Right One
Pick the depth that matches your baking, three inches for most cakes and four for tall layers.
Grease lightly, line the bottom with parchment, and let the pan cool before you unmold.
Final Thoughts
After baking the same recipes in all three pans, the Fat Daddio's POB-9133 Anodized Aluminum Sheet Cake Pan is my top pick for most bakers. The three inch depth fits standard recipes perfectly, bakes evenly, and releases cleanly every time. It is the pan I reach for on a regular baking day, and it has earned its place on my shelf.
The four inch POB-9134 is the better pick for tall layer cakes and deep bakes, while the two inch pan suits brownies and thin cakes. Any of the three will serve you well, since the anodized aluminum and solid build are the same across the line. Pick the depth that matches your baking, and enjoy cakes that rise evenly every time.



