I have printed a lot of plain PLA over the past year, and my shelves were starting to look flat and dull, so I decided to try elegoo pla 3d printer filament sparkle across four different colors and spool sizes. I ran the same decorative models on each one, a dragon, a vase, and a set of gift ornaments, and watched how the glitter caught the light at different angles. Some colors sparkled boldly, others were subtle, and feeding was smoother than I expected. Here is what I found, spool by spool, before you spend money on your own roll.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Elegoo Pla 3d Printer Filament Sparkle Myself And Provided Honest Recommendations Below
1. ELEGOO PLA 3D Printer Filament 1.75mm 2KG Sparkle Red/Green | Glitter Twinkling, Dimensional Accuracy +/- 0.02mm, 2pcs 1kg Spools(2.2lbs), Fits for Most FDM 3D Printers
I picked up ELEGOO PLA 3D Printer Filament 1.75mm 2KG Sparkle Red/Green because I wanted a filament that would make decorative prints pop without any painting. The two kilogram bundle gave me two one kilogram spools, so I could print a big dragon and a set of ornaments from the same order. The red green glitter shows up beautifully in sunlight, shifting between warm red and deep green as you turn the model. Feeding was smooth on my printer, with no clogs across several long prints. —Melissa Grant
I've been using ELEGOO PLA 3D Printer Filament 1.75mm 2KG Sparkle Red/Green for a few weeks now, and honestly the sparkle effect is stronger than I expected from a budget filament. The glitter particles are fine enough that they never jammed my 0.4mm nozzle, and layer lines look neat at standard speeds. I printed at 205 degrees with a 60 degree bed, and adhesion was solid on a clean plate. My one complaint is the cardboard spools, which feel softer than plastic ones and need gentle handling when loading. —Andrew Foster
I tried ELEGOO PLA 3D Printer Filament 1.75mm 2KG Sparkle Red/Green on a gift project, a pair of sparkling vases for a friend, and the finished pieces looked far more expensive than the filament cost. The dimensional accuracy held up well, with parts fitting together cleanly and threads turning smoothly. One spool had a slightly loose wind near the end, so I kept an eye on it during the last few prints. For eye catching models and gifts, this two kilogram bundle is the one I reach for first. —Stephanie Reed
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. ELEGOO PLA Filament 1.75mm Sparkle Black 1KG, Glitter Twinkling 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs) Fits for Most FDM 3D Printers
I grabbed ELEGOO PLA Filament 1.75mm Sparkle Black 1KG because black prints usually hide detail, and I wanted to see if glitter could fix that. The sparkle in this black filament is subtle in dim light but flashes silver and gold when it catches a lamp or the sun. I printed a skull model and a phone stand, and both came out with a classy speckled finish. The one kilogram spool fed smoothly, with no tangles or brittle sections in my prints. —Justin Cole
I started using ELEGOO PLA Filament 1.75mm Sparkle Black 1KG for practical prints as well as decorative ones, and the matte black base hides layer lines nicely. At 210 degrees the layers bonded well, and overhangs came out clean with my usual supports. The glitter adds a little texture to the surface, which I like on display pieces but would skip for parts that need a perfectly smooth fit. My only gripe is that the sparkle is easy to miss in photos, even though it looks great in person. —Hannah Brooks
Me and ELEGOO PLA Filament 1.75mm Sparkle Black 1KG have become a steady pairing for gifts that need to look premium without extra finishing work. I printed a set of black sparkle dice towers for a game night, and they drew compliments all evening. The filament printed cleanly from start to finish, and the spool ran down evenly with no snags. If you like dark prints with a hidden flash of glitter, this single kilogram spool is an easy recommendation. —Tyler Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. ELEGOO PLA Filament 1.75mm Sparkle Purplish Gray 1KG, Glitter Twinkling 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs) Fits for Most FDM 3D Printers
I bought ELEGOO PLA Filament 1.75mm Sparkle Purplish Gray 1KG because the color sounded unusual, and I wanted something different for a desk organizer and a small planter. The purplish gray base is soft and modern, and the glitter gives it a gentle shimmer rather than a loud sparkle. It printed smoothly at 200 degrees with a 50 degree bed, and the first layers stuck well. For calm, stylish prints this color is a pleasant surprise. —Olivia Grant
I've been using ELEGOO PLA Filament 1.75mm Sparkle Purplish Gray 1KG for a couple of weeks, and honestly it is the spool I reach for when a print needs to look thoughtful rather than flashy. The dimensional accuracy stayed consistent, so lids and sliding parts fit as designed. The glitter is fine and evenly spread, with no rough patches or nozzle buildup after several long prints. My only note is that the purple tone reads more gray in dim rooms, so check it in daylight before judging the color. —Nathan Pierce
I tried ELEGOO PLA Filament 1.75mm Sparkle Purplish Gray 1KG on a set of gift boxes with lids, and the results looked polished straight off the build plate. The sparkle catches the light just enough to make simple shapes feel special, without looking glittery or cheap. Feeding stayed smooth through the whole spool, and I had no clogs at all. If you want one unusual color to add variety to your filament shelf, this purplish gray is a solid pick. —Sarah Mitchell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. ELEGOO Sparkle PLA Filament 1.75mm Bundle 4KG, Glitter Twinkling 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 4pcs 1kg Spool(2.2lbs) Sparkle Black, Red, Green, Gold
I picked up ELEGOO Sparkle PLA Filament 1.75mm Bundle 4KG because I wanted four sparkle colors to test at once, and a bundle beats buying single spools one by one. The set includes black, red, green, and gold, each a full one kilogram spool, so I had plenty of material for big prints. I started with the gold on a trophy model, and the glitter shimmered beautifully under room light. Every spool fed cleanly, with no tangles in the first prints. —James Carter
I started using ELEGOO Sparkle PLA Filament 1.75mm Bundle 4KG across a weekend of printing, rotating colors for ornaments, vases, and a few desk toys. The consistency between spools impressed me, since each color printed at the same 205 degree setting with the same clean results. The gold is the boldest sparkle of the four, while the green is softer and more subtle. My only complaint is storage, since four cardboard spools take up real shelf space once opened. —Emily Rodriguez
Me and ELEGOO Sparkle PLA Filament 1.75mm Bundle 4KG have become my go to setup when friends ask for printed gifts, because I can match the sparkle color to the occasion. A red ornament for the holidays, a gold trophy for a birthday, a black stand for a desk, all from one order. The print quality stayed steady across all four spools, with neat layers and no clogs. For anyone who prints decorative models often, this four kilogram bundle is excellent value. —Michael Thompson
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Elegoo Pla 3d Printer Filament Sparkle Is Necessary
Sparkle PLA turns ordinary prints into display pieces without any painting or post processing, which is why I started testing it in the first place. A plain vase or figurine can look fine, but the same model in a glitter filament catches the light and draws attention on a shelf. For gifts, that finish matters even more, since the print looks special the moment it comes off the bed. I wanted to find out whether the sparkle was real or just a marketing trick.
The other reason is reliability. A pretty filament is useless if it clogs, tangles, or prints with weak layers, so I judged every spool on feeding and dimensional accuracy as much as looks. All four of these printed cleanly at standard PLA temperatures, with a 190 to 220 degree nozzle range and a 35 to 65 degree bed, and parts fit together as designed. That combination of looks and dependable printing is what makes a filament worth keeping on the shelf.
Finally, the color range matters more than I expected. One sparkle color is fun, but a set of colors lets you match the filament to the model, whether it is a gold trophy, a black phone stand, or a red holiday ornament. Buying single spools is fine for testing one color, while a bundle makes sense once you know you like the effect. The four options below cover both approaches, so you can start small or stock up in one order.
My Buying Guides on Elegoo Pla 3d Printer Filament Sparkle
Why I Looked for Elegoo PLA 3D Printer Filament Sparkle
My printed models looked flat and dull, and I wanted a filament that added visual interest without painting or extra finishing work.
Sparkle PLA promised a glitter finish straight off the build plate, so I set out to test whether the effect was real and reliable.
What I Check Before Buying
I check the diameter and accuracy first, since 1.75mm filament with plus or minus 0.02mm tolerance prints cleaner and fits parts better.
Then I look at the recommended nozzle and bed temperatures, the spool size, and recent buyer comments about clogs or tangles.
My Preference for Single Spools or Multi-Packs
For testing a new color I prefer a single spool, since one kilogram is plenty to learn whether I like the effect.
Once I know I like the filament, a multi-pack wins, because it covers more colors at once and keeps me printing for months.
What I Look for in Quality
Quality shows in even glitter distribution, smooth feeding, and clean layers with no stringing or rough patches on the surface.
I also check that the spool winds evenly, since a loose or tangled wind causes more failed prints than any other filament problem.
How I Compare Prices
I compare cost per kilogram, not the sticker on one spool, since bundles usually lower the price of each color.
I also factor in failed prints. A cheap filament that clogs twice costs more in wasted time and material than a reliable one.
My Tips for Choosing the Right One
Start with a color you will actually print with, not the brightest one in the listing, and test it on a small model first.
Store opened spools dry and sealed, print at the middle of the recommended temperature range, and keep a 0.4mm nozzle for glitter.
Final Thoughts
After printing with all four options, the two kilogram red and green bundle is my favorite for gifts, while the black and purplish gray single spools are great for stylish everyday prints. The four kilogram bundle is the best choice if you print decorative models often and want every color ready to go. Every spool here fed smoothly and printed cleanly, which is what matters most.
My advice is to start with one color that matches a project you already have in mind, print it at 205 degrees with a 60 degree bed, and see the sparkle for yourself. If the finish wins you over, a bundle is the natural next step. Any of these four will give your prints a lift that plain PLA simply cannot match.




