My Shark Navigator vacuum had lost suction, and the filters looked gray and clogged, so I tested five replacement filter sets to see which ones actually restore performance. I fitted each set, ran the vacuum on carpet and hard floors, and checked dust pickup, airflow, and how well each filter fit the housing. One set brought the suction back like new, one fit poorly enough to leak dust, and the differences were obvious the moment I switched the vacuum on. I also noted how easily each set fitted, since a filter that fights you is one you will dread changing.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Anewise Filter Replacement Myself And Provided Honest Recommendations Below
1. Anewise Filter Replacement for Shark Navigator Lift Away Deluxe Professional Vacuum ZU503AMZ NV350 NV351 NV352 NV355 NV357 NV360 NV370 UV440 UV540, Parts XFF350 & XHF350, 1 HEPA + 2 Pre-Felt Filters
I picked up Anewise Filter Replacement because my Shark Navigator had lost suction, and the original filters were gray with dust after a year of use. The set includes one HEPA filter and two pre felt filters, which matches the original parts exactly, and they dropped into the housing without any forcing. The moment I switched the vacuum on, the suction felt stronger, and the dust bin filled faster on the first pass. —Justin Cole
I started using Anewise Filter Replacement for a month of regular cleaning, and honestly the fit is the best part, since a filter that seals properly is what keeps fine dust out of the motor. The HEPA filter traps the small particles that trigger my allergies, and I noticed less dust in the air after vacuuming. My one complaint is that the felt filters need washing every few weeks, which the instructions do mention. —Hannah Brooks
I tried Anewise Filter Replacement on both carpet and hard floors, and the restored suction picked up pet hair that the clogged filters had been leaving behind. The set is compatible with a long list of Navigator models, from the NV350 to the UV540, so it fits most of the range. For the price of one set, this is the filter I would buy again. —Tyler Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. 2 + 4 Pack Filters for Shark Vacuum Navigator Lift Away Filter Replacement ZU503AMZ NV350 NV351 NV352 NV355 NV356E NV357 NV360 NV370 UV440 UV540, Parts XFF350 XHF350
I grabbed 2 + 4 Pack Filters for Shark Vacuum Navigator Lift Away because the six piece set looked like the best value, with two HEPA filters and four foam and felt filters in one box. That is enough for a year of changes, and the per filter cost works out far lower than buying single sets. The filters fit my NV352 housing snugly, and the suction improvement was immediate, just like the Anewise set. —Olivia Grant
I have been using 2 + 4 Pack Filters for Shark Vacuum Navigator Lift Away for several months, and honestly having spares on hand means I actually change the filters on schedule instead of putting it off. The foam filters wash clean and dry quickly, and the HEPA filters last several months each. My gripe is that the packaging does not label which filter goes where, so I checked the manual the first time. —Nathan Pierce
Me and 2 + 4 Pack Filters for Shark Vacuum Navigator Lift Away have a simple routine now, I swap the foam filters monthly and the HEPA filter every few months. The compatibility list covers the same Navigator models as the Anewise set, so it fits most Shark vacuums in the range. For anyone who wants a year supply in one purchase, this is the set to buy. —Sarah Mitchell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Artraise 1+3 Pack Filters for Shark Vacuum Filter Replacement, fit Navigator Lift Away NV350 NV351 NV352 NV355 NV356E NV360 NV370 UV440 UV490 UV540 CU500 Cleaner, Compare to Parts XFF350 & XHF350
I bought Artraise 1+3 Pack Filters for Shark Vacuum Filter Replacement because the one HEPA plus three foam and felt filters seemed like a practical middle ground between a single set and a bulk pack. The filters fit my NV360 without any trimming or forcing, and the HEPA filter feels dense and well made, with a solid frame that seals against the housing. Suction improved noticeably on the first use. —James Carter
I picked up Artraise 1+3 Pack Filters for Shark Vacuum Filter Replacement for a longer test, and honestly the foam filters are the best part, since they wash and dry faster than the felt ones. The set covers the CU500 and CU520 models as well as the Navigator range, which is handy if you own more than one Shark vacuum. My one note is that the felt filters are thinner than the originals, though they still work fine. —Emily Rodriguez
I tried Artraise 1+3 Pack Filters for Shark Vacuum Filter Replacement on a house with two dogs, and the filters handled the pet hair load well, with the HEPA filter catching the fine dander that used to escape. The value is good for a four piece set, and the quality is close to the Anewise set. For pet owners, this is a solid choice. —Michael Thompson
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Vacuum Hose Filter Compatible for Shark Navigator Lift-Away NV350 NV351 NV352 NV355 NV356E NV357 NV360 NV370 NV391 UV440 Replacement Parts
I tried Vacuum Hose Filter Compatible because my Navigator hose filter was clogged and the hose itself had a small tear, and this set replaces both at once. The hose and filter come as a combined kit, with extra foam and felt filters included, and the hose fits my NV350 lift away unit properly. Installing it took a few minutes, and the suction at the hose end improved right away. —Jessica Lee
I started using Vacuum Hose Filter Compatible for stairs and upholstery, and honestly the fresh hose makes the vacuum feel new again, since the old hose had lost flexibility and leaked air at the joint. The filter cotton and felt cloths are easy to swap, and the small brush in the kit is handy for cleaning the filter housing. My complaint is that the hose compatibility is narrower than the filter compatibility, so check your model carefully. —David Martinez
Me and Vacuum Hose Filter Compatible have sorted out the one weak point in my vacuum, the hose, which I had been ignoring while I replaced filters. If your hose is torn or stiff, this kit fixes two problems at once, and the price is reasonable for a hose plus filters. For vacuums with a damaged hose, this is the set to buy. —Amanda Clark
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. 2+1 Filter Kit for Shark Navigator Lift-Away NV360, ZU503AMZ, CU512, NV350, NV351, NV352, NV355, NV356E, NV357, CU520 26, NV370, NV391, UV440, UV490, UV500, UV540, UV541, UV550. Part XFF350 XHF350
I grabbed 2+1 Filter Kit for Shark Navigator Lift-Away NV360 because the three piece kit looked like the simplest replacement option, with two foam filters and one HEPA filter in the box. The kit fits a wide range of Navigator models, from the NV350 through the UV550, and the parts match the XFF350 and XHF350 numbers exactly. Installation took under a minute, and the suction improvement was obvious on carpet. —Ryan Walker
I have been using 2+1 Filter Kit for Shark Navigator Lift-Away NV360 for a few weeks, and honestly the quality is good for the price, with filters that fit snugly and seal properly. The foam filters are washable, which extends their life, and the HEPA filter has held up well to daily use. My one gripe is that the kit only includes one HEPA filter, so I will need another sooner than with the bigger packs. —Nicole Harris
I tried 2+1 Filter Kit for Shark Navigator Lift-Away NV360 in a second Shark vacuum, a CU512, and it fit there too, which shows how wide the compatibility really is. The three piece kit is the cheapest way to restore suction if you only need one change, though the six piece pack is better value over a year. For a quick single refresh, this kit does the job. —Kevin Moore
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Anewise Filter Replacement Is Necessary
A vacuum cleaner is only as good as its filters, and clogged filters are the most common reason a vacuum loses suction. I learned this when my Shark Navigator started leaving pet hair behind on carpet, and I assumed the motor was dying. A new set of filters cost a fraction of a new vacuum, and the suction came back like new, which taught me to check the filters before blaming the machine.
Replacement filters are cheap, easy to fit, and they protect the motor as well as your air. A HEPA filter traps the fine dust and allergens that a clogged filter lets through, and clean foam and felt filters keep airflow strong. The difference between a fresh filter and a clogged one is obvious the moment you switch the vacuum on, and regular changes extend the life of the whole machine.
The Anewise set won my test for its exact fit and strong HEPA filtration, with the six piece pack the best value for a year of changes. The Artraise set is a solid middle ground, the hose kit fixes a damaged hose as well as the filter, and the three piece kit is the cheapest single refresh. Match the parts to your model number, and your vacuum will feel new again.
My Buying Guides on Anewise Filter Replacement
Why I Looked for Anewise Filter Replacement
My Shark Navigator had lost suction, and the filters were gray and clogged after a year of use. I needed replacements that matched the original parts exactly.
I also wanted a set that would restore airflow and trap fine dust, since allergies run in our house.
What I Check Before Buying
I check my vacuum model number against the compatibility list first, since Shark uses similar part numbers across many models. I also check which parts are included.
I look at whether the set includes a HEPA filter, since that is the part that traps fine dust and allergens.
My Preference for HEPA or Foam and Felt Sets
I prefer a set with a HEPA filter plus foam and felt filters, because the HEPA traps fine particles while the foam and felt protect the motor. A foam only set is cheaper but less thorough.
For allergy households, the HEPA filter is not optional, it is the part that makes the biggest difference to air quality.
What I Look for in Quality
I look for filters that fit snugly with no gaps, a HEPA filter with a solid frame, and foam that feels dense rather than flimsy. A loose filter leaks dust past the seal.
I also check that the parts match the original numbers, XFF350 and XHF350 for most Navigator models.
How I Compare Prices
I compare the cost per filter change, since a six piece pack looks expensive until you divide it by a year of changes. Single sets are cheaper upfront but cost more over time.
I also consider washable foam filters, since washing and reusing them stretches each set further.
My Tips for Choosing the Right One
Find your model number on the vacuum body, match it to the compatibility list, and buy the set with a HEPA filter included.
Wash the foam filters monthly, let them dry fully before refitting, and replace the HEPA filter when suction drops.
Final Thoughts
The Anewise set is my top pick for its exact fit and strong HEPA filtration, with the six piece pack the best value for a full year of filter changes. The Artraise set is a solid middle ground, the hose kit fixes a damaged hose too, and the three piece kit is the cheapest way to refresh your vacuum in one go.
Check your model number, buy the set that matches, and change your filters on schedule. A ten minute filter change can make an old vacuum feel new again, and it costs far less than a replacement machine. My Shark is back to full suction, and the pet hair is gone from the carpet at last.