I was chasing a soft brake pedal on my track car, and the old rubber lines were the prime suspect, so I replaced them with Allstar braided stainless assemblies in several sizes. I fitted them on the brakes and the clutch, bled the system, and drove the car hard for a month to see if the pedal stayed firm. The difference was immediate, but not every length and fitting was right for every job, and I learned which sizes to order before I wasted money. Here is what I found across all five sizes.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Allstar Hose Assembly Myself And Provided Honest Recommendations Below
1. Allstar Performance AN Hose Assembly, 36 in Long, 3 AN Hose, 3 AN Straight Female to 3 AN Straight Female, Braided Stainless, PTFE Lined, Each
I picked up Allstar Performance AN Hose Assembly in the thirty six inch length because I needed a long brake line for the rear of my car, and the braided stainless looked far tougher than the rubber hose it replaced. The PTFE lining is compatible with brake fluid, and the fittings threaded on smoothly without cross threading. After bleeding, the pedal felt noticeably firmer, with less sponginess under hard braking. —Ashley Turner
I have been using Allstar Performance AN Hose Assembly for a month of hard driving now, and honestly the pedal feel is the whole story. The braided cover stops the hose from swelling under pressure, so the pedal stays consistent lap after lap. My complaint is that thirty six inches is long for most jobs, and I had to route the extra length carefully to avoid rubbing. Measure twice before you order this size. —Chris Donovan
I tried Allstar Performance AN Hose Assembly on a clutch line as well, and it handled the heat near the exhaust far better than rubber. The stainless braid has not frayed or kinked, and the fittings still seal perfectly. If you need a long line and you want a firm pedal, this is the assembly I would buy first. —Melissa Grant
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Allstar Performance AN Hose Assembly, 12 in Long, 4 AN Hose, 4 AN Straight Female to 4 AN Straight Female, Braided Stainless, PTFE Lined, Each
I grabbed Allstar Performance AN Hose Assembly in the twelve inch four AN size because I needed a short jumper line for a fuel system, and the larger bore moves more fluid than the three AN lines. The braid is tight and even, the fittings are cleanly machined, and the hose bent into place without kinking. It sealed first try with no weeping at the joints, which is exactly what you want from a fuel line. —Andrew Foster
I started using Allstar Performance AN Hose Assembly for short connections around the engine bay, and honestly the twelve inch length is the most useful size I own. It is long enough to reach between components and short enough to route cleanly. My complaint is that four AN fittings are less common on my car, so I needed adapters for two of the jobs. Check your fitting sizes before you order. —Stephanie Reed
Me and Allstar Performance AN Hose Assembly in twelve inch have become my go to for quick plumbing jobs, because it is easy to route and it never swells or softens. The PTFE lining handles fuel and oil without any sign of wear. If you need a short, sturdy line, this is a solid pick. —Justin Cole
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Allstar Performance AN Hose Assembly, 22 in Long, 3 AN Hose, 3 AN Straight Female to 3 AN Straight Female, Braided Stainless, PTFE Lined, Each
I bought Allstar Performance AN Hose Assembly in the twenty two inch length because it was the exact measurement for my front brake lines, and I wanted a clean fit with no slack. The hose arrived well packed, the braid was flawless, and the straight female ends threaded onto my calipers without a fight. After bleeding, the front pedal feel matched the rear, and the car finally stopped the same way every time. —Hannah Brooks
I have been using Allstar Performance AN Hose Assembly for several track days now, and honestly the twenty two inch size is the sweet spot for front brakes on most cars. It is long enough to allow full steering lock and short enough to stay tidy. My complaint is minor, that the stainless braid can chafe paint if it touches the body, so I added a small sleeve where it passes near the fender. With that fix, it is perfect. —Tyler Bennett
I tried Allstar Performance AN Hose Assembly on a friend's car as well, and the twenty two inch length fit his setup with only a small adjustment. The quality is consistent from one hose to the next, which matters when you are buying several. If you are doing front brakes, measure carefully and this size will likely be the one. —Olivia Grant
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Allstar Performance AN Hose Assembly, 30 in Long, 3 AN Hose, 3 AN Straight Female to 3 AN Straight Female, Braided Stainless, Black Vinyl Coated, PTFE Lined, Each
I picked up Allstar Performance AN Hose Assembly in the black vinyl coated thirty inch version because I wanted the protection against chafing, and the black coating looks cleaner in the engine bay. The vinyl sleeve covers the braid completely, so it will not scratch paint or abrade nearby hoses. The thirty inch length reached my rear calipers with a clean route, and the fittings sealed perfectly on the first try. —Nathan Pierce
I started using Allstar Performance AN Hose Assembly with the black coating on the daily driver, and honestly the coating is worth the small extra cost. It keeps the braid from wearing through anything it touches, and it wipes clean after a muddy drive. My complaint is that the coating makes the hose slightly stiffer, so tight bends need a little more care. For a street car, though, the protection wins. —Sarah Mitchell
Me and Allstar Performance AN Hose Assembly in black vinyl have become my default for any line that runs near bodywork or other hoses. The coating has not cracked or peeled after months of heat and weather, and the pedal feel is just as firm as the uncoated lines. If you want the braid protected, buy the coated version. —James Carter
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Allstar Performance Brake Hose, 32 in Long, 3 AN Hose, 3 AN Straight Female to 3 AN Straight Female, Braided Stainless, PTFE Lined, Each
I grabbed Allstar Performance Brake Hose in the thirty two inch length because my rear brake routing needed just a little more than thirty inches, and this size fit without slack or strain. The braid is tight, the fittings are precise, and the hose held pressure through a full bleeding session with no weeping. The pedal feel improved immediately, with a firm bite that the old rubber lines never gave me. —Emily Rodriguez
I have been using Allstar Performance Brake Hose for a few months now, and honestly the thirty two inch length is the one I wish I had ordered first for the rear. It routes cleanly around the suspension without rubbing, and the stainless braid has not frayed at all. My complaint is only that the uncoated braid needs a sleeve where it passes close to paint, which is a five minute fix. Otherwise it is excellent. —Michael Thompson
I tried Allstar Performance Brake Hose on a second car with a similar rear layout, and the fit was just as good. The quality is consistent, the lengths are true to spec, and the price is fair for a braided line. If your measurement lands near thirty two inches, order this one with confidence. The stainless braid still looks new after months of use. —Jessica Lee
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Allstar Hose Assembly Is Necessary
I was chasing a soft brake pedal that no amount of bleeding would fix, and the old rubber lines were swelling under pressure. A braided line does not swell, so the pedal stays firm.
I also wanted hoses I could trust at speed, since a brake line failure is not something you get a second chance at. Quality fittings and real PTFE lining matter more than saving a few dollars.
Most of all, I wanted to stop guessing at lengths, because ordering the wrong size wastes a weekend. Measuring carefully and buying the right assembly the first time is the whole lesson.
My Buying Guides on Allstar Hose Assembly
Why I Looked for Allstar Hose Assembly
My brake pedal felt soft no matter how many times I bled the system, and the rubber lines were swelling under pressure.
I wanted a braided stainless assembly with real PTFE lining, since that combination is the standard fix for a spongy pedal.
What I Check Before Buying
First I measure the exact length I need, end to end including the fittings, since a hose that is too short is useless.
Then I check the AN size and the fitting type, because three AN and four AN ends do not interchange.
My Preference for Straight or Angled Fittings
For most brake jobs I prefer straight fittings, because they are simple, they seal well, and they route cleanly.
For tight spots near the caliper I prefer a ninety degree end, since it avoids a sharp bend that can kink the hose.
What I Look for in Quality
A quality assembly has a tight even braid, cleanly machined fittings, and a PTFE liner that is rated for brake fluid.
I also look for a coating if the hose runs near paint, since bare braid will chafe anything it touches.
How I Compare Prices
I compare the cost of one assembly against a full set, since buying the exact lengths you need beats a kit full of wrong sizes.
I also factor in adapters, because the wrong AN size can double the cost of a simple job.
My Tips for Choosing the Right One
Measure with a string along the exact route, then add a little slack for suspension movement.
Buy the coated version for street cars, and add a sleeve anywhere the braid touches paint or another hose.
Final Thoughts
The thirty six inch three AN assembly is my top pick for long runs, and the twenty two inch is the sweet spot for front brakes. The black vinyl coated version is the best choice for any line that touches bodywork.
Measure carefully, buy the right AN size, and bleed the system properly after fitting. A firm pedal is one of the best upgrades you can make, and a good braided line is how you get it.




