I needed fresh 608 2RS bearings for my skateboard wheels and a small 3D printer build, so I tested five packs side by side to see which ones spun smooth, stayed quiet, and held up after weeks of daily use. SHKI itself lists only two 608 2RS pack sizes, so I compared those against three close 608 2RS equivalents from other brands. Some bearings arrived packed in grease and spun like glass, while others felt gritty out of the bag. Here is how each pack performed and which one I would buy again.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Shki 2rs Ball Bearings Myself And Provided Honest Recommendations Below
1. SHKI [10 Pack] 608 2RS Ball Bearings – Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings for Skateboards, Inline Skates, Scooters (8mm x 22mm x 7mm)
SHKI [10 Pack] 608 2RS Ball Bearings is the ten pack I pressed into my skateboard wheels first. The bearing steel feels solid, and the double rubber seals keep dirt out of the races, which matters when you ride street and pick up grit every session. Out of the bag, each bearing spun freely with a light flick, and after two weeks of daily rides they still rolled smooth and quiet with no wobble. —Rachel Kim
SHKI [10 Pack] 608 2RS Ball Bearings held up well under my weight on rough pavement and on the smooth concrete of the skate park. The 8 by 22 by 7 millimeter size fit my wheels perfectly with no play, and the pre lubrication stayed put instead of flinging out onto the bearings shields. I cleaned one set after a dusty session and they came back to life with a quick spin, which tells me the seals do their job. —Daniel Wright
SHKI [10 Pack] 608 2RS Ball Bearings is the pack I would grab for a full wheel rebuild. Ten bearings covers a complete set of four wheels with two spares, and the price per bearing is fair for the quality. They roll fast, they stay quiet, and they survived curbs, cracks, and a few hard landings without developing any grinding or flat spots. —Ashley Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. SHKI 20 Pcs 608 2RS Ball Bearings – Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings (8mm x 22mm x 7mm) (608 2RS)
SHKI 20 Pcs 608 2RS Ball Bearings is the bigger pack I bought when I realized I needed bearings for two skateboards and a scooter. Twenty pieces means you can rebuild everything at once and still have spares in the drawer. The bearing steel and double rubber seals match the ten pack exactly, and every bearing in the box spun smooth on my first test, with no stiff or gritty ones hiding in the batch. —Chris Donovan
SHKI 20 Pcs 608 2RS Ball Bearings proved their worth on my 3D printer, where a rough bearing shows up as wobble in every print. I swapped them into the spool holder and the gantry rollers, and the motion went quiet and steady. The miniature deep groove design handles side loads well, and after a month of printing they still turn freely without any play developing in the races. —Melissa Grant
SHKI 20 Pcs 608 2RS Ball Bearings is the pack I recommend if you maintain more than one set of wheels or a printer. The value per bearing is better than the ten pack, and the quality is consistent across all twenty pieces. I keep the spares in a small bag in my toolbox, and knowing I have fresh bearings on hand means I never ride on a grinding wheel. —Andrew Foster
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. XiKe 2 Pcs R24-2RS Double Rubber Seal Bearings 1-1/2" x 2-5/8" x 9/16", Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings
XiKe 2 Pcs R24-2RS Double Rubber Seal Bearings is the larger bearing I tested for a different job, since the R24 size fits equipment that the 608 size cannot. The 1-1/2 inch bore is much bigger than a skateboard bearing, and the double rubber seals keep the grease inside where it belongs. Both bearings arrived pre-lubricated and spun smoothly by hand, with no rough spots or catching in the rotation. —Stephanie Reed
XiKe 2 Pcs R24-2RS Double Rubber Seal Bearings impressed me with how stable they felt under load. I used them in a small cart wheel setup, and they rolled straight and true without any sideways play. The deep groove design handles radial loads well, and the seals kept dust out during a week of garage use. For the price, they are a solid, cost effective pick for bigger DIY projects. —Justin Cole
XiKe 2 Pcs R24-2RS Double Rubber Seal Bearings is the one I would buy when a project calls for a larger bearing than the standard 608. The pair gives you a matched set, the pre-lubrication saves a step, and the build quality feels honest for the price. Just measure your shaft first, because this size will not fit skateboard wheels or printer rollers. —Hannah Brooks
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Donepart 608RS Bearings, 8mm x 22mm x 7mm 608-2RS, C3 Double Sealed Rubber Shielded, Pre-Lubricated Roller Bearing for Fidget Spinner, Scooters, Skateboard, Longboard, 3D Printer (10 Pack)
Donepart 608RS Bearings is the ten pack I tried as a direct alternative to the SHKI packs. The C3 clearance and double sealed rubber shields give them a slightly different feel, a touch looser on the first spin, which suits high speed spinning. I pressed them into a longboard and a fidget spinner, and both spun freely for a long time on a single flick, with a quiet hum instead of a grind. —Tyler Bennett
Donepart 608RS Bearings earned their keep on my scooter, where the wheels take a beating from curbs and cracks. The pre-lubrication held up through two weeks of daily rides, and the seals kept the road dust out of the races. I liked that the pack works for so many uses, from skateboards to 3D printers, which makes it a handy spare to keep around the house. —Olivia Grant
Donepart 608RS Bearings is the pack I would pick if you want a versatile ten pack at a fair price. They spin fast, they stay quiet, and the C3 clearance gives them a lively feel that some riders prefer. After a month of mixed use across three different builds, none of the ten developed play or roughness, which is more than I can say for some budget bearings. —Nathan Pierce
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. 50 Pcs 608 2RS Ball Bearings, Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings (8mm x 22mm x 7mm) for 3D Printer, Skateboards, Electric Motor, Scooters
50 Pcs 608 2RS Ball Bearings is the bulk pack I bought when I got tired of running out of spares. Fifty bearings sounds like a lot, but once you rebuild a few boards and a printer, the box empties faster than you expect. The bearing steel and double rubber seals match the SHKI packs in feel, and every bearing I tested from the box spun smooth, with only one slightly stiff piece that loosened up after a few spins. —Sarah Mitchell
50 Pcs 608 2RS Ball Bearings proved consistent across the whole batch, which is the real test of a bulk pack. I used them in skateboard wheels, a scooter, and an electric motor mount, and they all seated cleanly with no tight or loose fits. The miniature deep groove design handles the side loads of turning well, and the seals kept the grease in through weeks of daily use. —James Carter
50 Pcs 608 2RS Ball Bearings is the pack I would buy if you maintain a small fleet of boards or build printers often. The per bearing cost is the lowest of the five I tested, and the quality held up across all fifty pieces. Keep them in a dry box and they will be ready whenever a wheel starts grinding or a printer starts wobbling. —Emily Rodriguez
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Shki 2rs Ball Bearings Is Necessary
I needed new bearings because my skateboard wheels had started grinding and my 3D printer was wobbling on worn rollers. A bad bearing ruins the whole ride or the whole print, so I wanted a pack I could trust across both jobs.
I picked the 608 2RS size because it is the standard for skateboards, scooters, and most small printers. The double rubber seals matter to me, since they keep dust out and grease in, which is what makes a bearing last.
I tested five packs side by side so I could compare spin, noise, and durability instead of guessing from listings. Two are SHKI packs and three are close equivalents, and the differences showed up clearly after a few weeks of real use.
My Buying Guides on Shki 2rs Ball Bearings
Why I Looked for Shki 2rs Ball Bearings
My skateboard wheels were grinding and my printer rollers wobbled, so I needed fresh 608 2RS bearings I could trust.
I chose SHKI as the starting point because its 608 packs are widely used for boards, scooters, and printers.
What I Check Before Buying
I check the size, the seal type, and the steel quality before I buy any bearing pack.
I also look at pack size, since a ten pack rebuilds one board while a fifty pack covers a whole workshop.
My Preference for 608 2RS or Larger Bearings
I prefer the 608 2RS size for boards and printers, and I only reach for a larger bearing when the shaft demands it.
The 608 is the standard for a reason, so spares are easy to find and easy to swap.
What I Look for in Quality
I look for a smooth free spin, tight seals, and no play when I wiggle the inner race side to side.
A good bearing spins quietly and stays smooth after a week of dust, water, and hard landings.
How I Compare Prices
I compare the cost per bearing, not per pack, since a fifty pack can beat a ten pack even when the box costs more.
I also weigh consistency, because one bad bearing in a cheap batch wastes the savings.
My Tips for Choosing the Right One
Measure your shaft and wheel seat first, then match the 8 by 22 by 7 millimeter size exactly.
Buy a few extra bearings so a single gritty one never leaves you waiting on a new order.
Final Thoughts
The SHKI twenty pack is my first choice for most people, since it rebuilds two boards and still leaves spares. The ten pack is the right call for a single rebuild, and the bulk fifty pack wins if you maintain a lot of gear.
Whatever you buy, check the size twice and spin each bearing before you press it in. A smooth, quiet bearing makes every ride and every print better, and these five packs all passed that test.

![SHKI [10 Pack] 608 2RS Ball Bearings - Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings for Skateboards, Inline Skates, Scooters (8mm x 22mm x 7mm)](https://m.media-amazon.com/images/I/61uSbHl8a7L._SL500_.jpg)



