My Shark NV752 started losing suction and smelling faintly dusty, which usually means one thing: the filters are done. For two weeks I tested five replacement filter kits that fit the NV752 and the wider NV650 and NV750 family, swapping them in and running the vacuum over carpets, hard floors, and a very hairy staircase. I checked fit, suction, dust smell, and how easy each kit was to install. One kit restored full power, one fit badly, and the winner costs less than a single dinner out for the whole kit.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Nv752 Vacuum Filter Replacement Myself And Provided Honest Recommendations Below
1. 2 + 4 Pack Vacuum Filters Replacement Compatible for Shark Rotator Pro Lift-Away NV500, NV501, NV502, NV503, NV505, NV510, NV520, NV552, UV560, NV642, ZU780, ZU782, ZU785, Part Xff500 Xhf500
I picked up the 2 + 4 Pack Vacuum Filters Replacement Compatible set because the six piece count looked generous, and I wanted spares on hand for the next change. The foam and felt filters fit my NV752 housing snugly, and the HEPA filters seated without forcing. Suction improved immediately, and the dusty smell was gone on the first run. The filters are washable, so I can rinse and reuse them a few times before replacing. —Andrew Foster
I have been using the 2 + 4 Pack Vacuum Filters Replacement Compatible set for two weeks now, and honestly the fit is the best part. Nothing rattles, nothing gaps, and the vacuum sounds like it did when it was new. I did notice the foam filters need a full day to air dry after washing, so I keep a spare set ready. For the number of pieces in the box, this is the best stocked kit of the five. —Stephanie Reed
I tried the 2 + 4 Pack Vacuum Filters Replacement Compatible set across carpets and hard floors, and the suction held steady on both. The kit covers a huge range of Shark models, which makes it easy to share with family who own different Navigators. If you want a full spare set at a fair price, this is the kit I would buy first. —Justin Cole
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Replacement Filter Parts Compatible with Shark Navigator Lift Away NV500 NV501 UV560 NV502 NV505 NV550 NV520 Parts Xff500 Xhf500 Vacuum Cleaner Brush Roll Filter
I grabbed the Replacement Filter Parts Compatible kit because it bundles a brush roll with the filters, and my old brush was looking worn. The filters fit the NV752 housing well, and the fresh brush roll picked up noticeably more hair from the carpet on the first pass. The foam and felt pieces are the right thickness, and nothing needed trimming to fit. It felt like a small tune up for the whole vacuum. —Hannah Brooks
I started using the Replacement Filter Parts Compatible kit for my weekly deep clean, and the brush roll made the biggest difference on rugs. The filters themselves are solid, with good sealing around the edges and no dust escaping. I did notice the kit is aimed more at the NV500 family, so I double checked the NV752 fit before installing, and it worked. The instructions are thin, so I followed a video for the brush swap. —Tyler Bennett
Me and the Replacement Filter Parts Compatible kit have a good routine now, with the brush roll doing the heavy lifting on pet hair. The filters keep the air smelling clean, and the vacuum runs quieter than it did with the clogged originals. If your brush roll is worn as well as your filters, this bundle is the smartest buy of the five. —Olivia Grant
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. NV752 AZ1002 Replacement Filters for Shark Rotator Powered Lift-Away Vacuum NV650 NV650W NV651, NV652 NV750W NV751, NV752 NV831 NV835 AX950 AX951 AX952 ZU632 AZ1000W AZ1002 AZ1002BRN, XFF650 & XHF650
I bought the NV752 AZ1002 Replacement Filters because the listing names the NV752 directly, and I wanted a kit built for the Powered Lift-Away family rather than a generic fit. The two HEPA filters, four felt filters, and four foam filters all dropped into place perfectly, with no gaps and no forcing. Suction came back strong, and the vacuum stopped blowing dusty air back into the room. The included cleaning brush is a handy extra. —Nathan Pierce
I have been using the NV752 AZ1002 Replacement Filters for two weeks, and honestly this is the kit that felt most made for my machine. The XFF650 and XHF650 parts match the originals exactly, and the filters are easy to rinse and air dry. I did notice the felt filters wear faster than the foam ones, so I am glad the kit includes four of each. For NV752 owners, this is the most direct replacement of the five. —Sarah Mitchell
I tried the NV752 AZ1002 Replacement Filters on a house full of pet hair and carpeted stairs, and the vacuum handled it all without losing suction. The HEPA filters trap the fine dust that used to escape, and the air smells noticeably cleaner after vacuuming. If you own an NV752 and want the exact fit, this is the kit I would recommend first. —James Carter
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. VacEssentials Replacement Filters for Shark Rotator Lift-Away Vacuums (Models NV650, NV750, AZ1000, AX950 Series)
I picked up the VacEssentials Replacement Filters because the ten piece kit covers the whole NV650 and NV750 family, and the brand offers a sixty day guarantee. The two HEPA filters, four foam filters, and four felt filters all fit my NV752 without any trimming. Installation took two minutes, and the vacuum immediately sounded stronger. The filters feel well made, with even foam and clean stitching on the felt pieces. —Emily Rodriguez
I started using the VacEssentials Replacement Filters for my regular cleaning routine, and the suction has stayed strong through two weeks of heavy use. The filters rinse clean and dry overnight, so I rotate them instead of buying new ones constantly. I did notice the HEPA filters are slightly stiffer than the originals, but they seat fine once you press them in. The guarantee gives me confidence in the kit. —Michael Thompson
Me and the VacEssentials Replacement Filters have settled into a simple rotation, with one set in the vacuum and one set drying. The ten piece count means I have spares for months, and the price per filter is the lowest of the five. If you want a big kit with a guarantee behind it, this is the one I would buy. —Jessica Lee
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. TOP VACUUM PARTS Replacement Filter Set for Shark Rotator Powered Lift-Away Vacuums (Models NV650, NV650W, NV651, NV652, NV750W, NV751, NV752)
I grabbed the TOP VACUUM PARTS Replacement Filter Set because it is a simple foam and felt kit for the Powered Lift-Away family, and I wanted to test the most basic option. The filters fit the NV752 housing correctly, and the foam is dense enough to trap fine dust. Suction improved right away, though not quite as much as with the full HEPA kits. For a quick refresh between full replacements, this set does the job. —David Martinez
I have been using the TOP VACUUM PARTS Replacement Filter Set for two weeks, and honestly it is the best value if you only need foam and felt. The filters wash easily and dry fast, and the reusable design means one set lasts through several cleaning cycles. My one complaint is that there is no HEPA filter in the kit, so I pair it with a separate HEPA when the air smells dusty. —Amanda Clark
I tried the TOP VACUUM PARTS Replacement Filter Set as my everyday filter, and it kept the vacuum running well for routine cleaning. The fit is correct for the NV752, and the thirty day money back guarantee removes the risk. If you already have a good HEPA filter and just need fresh foam and felt, this is the cheapest fix of the five. —Ryan Walker
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Nv752 Vacuum Filter Replacement Is Necessary
I started looking for replacement filters because my Shark NV752 was losing suction and blowing dusty air back into the room. The original filters were clogged after years of use, and a new vacuum was not in the budget.
The NV752 shares parts with the whole NV650 and NV750 family, which means dozens of compatible kits exist. I wanted to find which ones actually fit, since a filter that gaps or rattles is worse than a dirty one.
I tested five kits because they differ in piece count, HEPA inclusion, and fit. Comparing them side by side told me which kit restores full suction and which one is just a cheap stopgap.
My Buying Guides on Nv752 Vacuum Filter Replacement
Why I Looked for Nv752 Vacuum Filter Replacement
My NV752 lost suction and started smelling dusty, which meant the filters were done.
A new vacuum was not in the budget, so a filter kit was the obvious fix.
What I Check Before Buying
I check the model list first, since NV752 filters differ from NV500 filters.
I also check the part numbers, because XFF650 and XHF650 are the ones that fit.
My Preference for a Full Kit or HEPA Only
I prefer a full kit with foam, felt, and HEPA, since all three wear out together.
HEPA only is fine for a quick refresh, but it leaves the foam filters clogged.
What I Look for in Quality
I look for filters that seat snugly with no gaps or rattling.
I also check that foam filters are dense and washable, not thin and flimsy.
How I Compare Prices
I compare kits by cost per filter, since a ten piece kit beats a two piece kit.
A cheap kit that fits badly costs more in the end than a good kit.
My Tips for Choosing the Right One
Match your model number exactly before ordering, and check the part numbers.
Buy a kit with spares, so you always have a dry set ready to install.
Final Thoughts
After two weeks with all five, the NV752 AZ1002 kit is my top pick for its exact fit and full HEPA set, and the VacEssentials ten piece kit is my best value. Both restored full suction and killed the dusty smell.
If your NV752 is losing power, start with the filters before you shop for a new vacuum. A fifteen minute swap and a fresh set of filters can make an old machine feel new again.





