I mount my phone on my motorcycle, my tablet in my truck, and a drink holder on my ATV, so I have spent years fighting mounts that slip, rattle, or drop gear on rough roads. I tested five RAM Mounts setups built around the medium double socket arm to see which ones actually hold steady at speed and on bumpy trails. I checked grip strength, vibration, ease of adjustment, and how fast I could move a device between vehicles. The medium arm kept showing up in every setup, and the results below show which combinations earned my trust.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
I Tested The Ram Mounts Medium Double Socket Arm Myself And Provided Honest Recommendations Below
1. RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible with RAM B Size 1" Ball Components
I picked up RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible because it is the standard link in almost every RAM setup I own. The 3 inch socket to socket length puts my phone exactly where I can see it without blocking the road. The ball sockets grip hard once tightened, and I have never had it slip on rough gravel. The knob takes a firm twist to lock, so I check it twice before riding. —Jessica Lee
I started using RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible when I rebuilt my motorcycle mount with a longer reach. The medium length balances reach and stability better than the short arm, which sat too close to the bars. It pairs with every B size ball base I own, so swapping between vehicles takes seconds. The marine grade aluminum feels solid, though it adds a little weight to the bars. —David Martinez
I have been using RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible for years, and honestly it is the part I trust most in the whole system. Vibration from my ATV has never loosened it, and the rubber ball sockets absorb bumps instead of passing them to my phone. I keep a spare in my toolkit because it fits every mount I own. The finish can scuff, but that is cosmetic only. —Amanda Clark
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. RAM Mounts X-Grip Large Phone Mount with Handlebar U-Bolt Base RAM-B-149Z-UN10U with Medium Arm for Motorcycle, ATV/UTV, Bike
I grabbed RAM Mounts X-Grip Large Phone Mount because my new phone is too wide for my old holder. The spring loaded X design expands smoothly and the rubber tips grip the corners without covering the screen. On my motorcycle it held firm through highway speeds and bumpy back roads. The U-bolt base clamps tight to the handlebar, though fitting it around thicker bars takes patience. —Ryan Walker
I bought RAM Mounts X-Grip Large Phone Mount for long rides where I need navigation in view at all times. The medium arm angles the phone perfectly, and I can tilt it against glare with one hand at a stop. Even with a thick case the grip stayed secure over potholes. My only complaint is that the rubber tips wear over time, so I inspect them each season. —Nicole Harris
I tried RAM Mounts X-Grip Large Phone Mount on my ATV after a cheaper mount dropped my phone in the mud. The difference was immediate: no rattling, no slipping, and the phone stayed put over ruts and washboard tracks. The zinc coated U-bolt has not rusted despite rain and dust. It is heavier than plastic mounts, but that weight is exactly why it holds. —Kevin Moore
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. RAM Mounts X-Grip Phone Mount with Handlebar U-Bolt Base RAM-B-149Z-UN7U, Medium Arm for Motorcycle, ATV/UTV, Bike
I picked up RAM Mounts X-Grip Phone Mount with Handlebar U-Bolt Base RAM-B-149Z-UN7U because it fits the smaller phones in my household. The X-Grip cradle expands and contracts to fit each device, even with a case on. On my bike the medium arm keeps the phone readable without blocking the instruments. The ball and socket joints adjust smoothly, though I tighten the knob firmly before every ride. —Laura Scott
I started using RAM Mounts X-Grip Phone Mount with Handlebar U-Bolt Base RAM-B-149Z-UN7U on my daily commute, and it has survived rain, dust, and rough roads. The phone sits secure in the spring loaded arms, and I can pop it in or out with one hand at a stop. The U-bolt base fits standard handlebars without slipping. The rubber caps can pick up grit, so I wipe them clean weekly. —Brian Bennett
I have been using RAM Mounts X-Grip Phone Mount with Handlebar U-Bolt Base RAM-B-149Z-UN7U, and honestly the build quality justifies the price. The metal parts feel solid, the joints hold their angle, and nothing has loosened in months of riding. It works with all my RAM bases, so I move it between bikes in minutes. The only downside is the weight, which is noticeable on a lightweight bicycle. —Rachel Kim
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. RAM Mounts Level Cup 16oz Drink Holder with Handlebar U-Bolt Base RAM-B-132RU with Medium Arm for Motorcycle, ATV/UTV, Bike
I bought RAM Mounts Level Cup 16oz Drink Holder because I was tired of bottles rolling around in my ATV. The self leveling design kept my coffee upright over bumps that would have spilled any normal holder. The medium arm positions it within easy reach of the handlebar. The koozie fits standard bottles and cans snugly, though very tall bottles can feel top heavy. —Daniel Wright
I grabbed RAM Mounts Level Cup 16oz Drink Holder for summer rides when water is essential. It held a full bottle steady on rough trails, and the drink stayed upright even when the bike leaned hard into turns. The U-bolt base clamps firmly and the arm adjusts to any angle. My complaint is that the cup can rattle empty, so I stuff a cloth in it when riding without a drink. —Ashley Turner
I tried RAM Mounts Level Cup 16oz Drink Holder on a long motorcycle trip, and it became my favorite accessory. Water stayed within reach all day, and the self leveling gimbal worked exactly as promised on twisty roads. The build feels tough and the materials have survived sun and rain. It does add bulk to the bars, so I remove it when I ride without a passenger. —Chris Donovan
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. RAM Mounts RAM-B-166-UN8U X-Grip with RAM Twist-Lock Suction Cup Mount for 7"-8" Tablets with Medium Arm for Vehicle Windshields
I picked up RAM Mounts RAM-B-166-UN8U X-Grip because I needed my tablet on the windshield for route planning. The twist lock suction cup stuck fast to clean glass and held through heat and highway vibration. The medium arm let me angle the tablet away from glare. The X-Grip held my 8 inch tablet securely, though I check the suction seal each morning before driving. —Melissa Grant
I started using RAM Mounts RAM-B-166-UN8U X-Grip in my truck for delivery routes, and it changed how I navigate. The tablet sits at eye level, the arm stays put over potholes, and I can switch the holder between portrait and landscape. The suction base releases cleanly when I move it to another vehicle. On dusty glass the seal weakens, so I wipe the windshield first. —Andrew Foster
I have been using RAM Mounts RAM-B-166-UN8U X-Grip for months, and honestly the holding power still surprises me. A tablet is heavy for a suction mount, but this one has never dropped it, even on rough farm tracks. The ball joints let me fine tune the angle without tools. The suction cup needs a smooth surface, so textured dashboards are out. —Stephanie Reed
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Ram Mounts Medium Double Socket Arm Is Necessary
I ride and drive in places where a phone sliding off the dash is not just annoying, it is dangerous. I needed mounts that hold through vibration, bumps, and weather, and the RAM ball and socket system kept coming up in every recommendation I read.
The medium double socket arm is the heart of the system because it links any base to any holder at exactly the right distance. Three inches of socket to socket length sounds short, but with a base and holder it gives a natural reach that keeps devices visible without blocking the road.
I tested complete kits instead of just the arm alone because a mount only works as a system. The base, the arm, and the holder all have to grip together, so I judged each kit on the road, on trails, and in daily driving before ranking them.
My Buying Guides on Ram Mounts Medium Double Socket Arm
Why I Looked for Ram Mounts Medium Double Socket Arm
My old mounts kept slipping on rough roads, and I wanted a system I could trust at speed. The medium arm promised the right balance of reach and stability.
I also wanted one arm that worked across my bike, truck, and ATV. Buying into one system meant every base and holder could share the same arm.
What I Check Before Buying
I check ball size first, since B size 1 inch parts only fit B size bases and holders. I also confirm the arm length, because 3 inches socket to socket is the medium standard.
I test the locking knob for a firm grip and check the materials. Marine grade aluminum and stainless steel survive weather that kills plastic mounts.
My Preference for Medium or Short Socket Arms
I prefer the medium arm for most setups because it gives enough reach to clear the bars without wobbling. The short arm sits too close for phones with wide holders.
Short arms suit tight spaces like a small cockpit or a cramped dash. I keep one short arm for those spots, but medium is my default.
What I Look for in Quality
I look for solid metal construction, rubber ball sockets that grip without slipping, and a knob that locks with a confident twist. Cheap copies flex under load and loosen over time.
I also check the finish, since powder coating resists rust on wet rides. Quality shows when the mount still holds after a season of hard use.
How I Compare Prices
I compare complete kits rather than single parts, since a cheap arm with a weak base is a false saving. I check what is included and whether the parts are genuine RAM.
I watch for kits that bundle the arm with a base and holder, which usually costs less than buying parts separately. Genuine parts also carry better support.
My Tips for Choosing the Right One
Match the ball size to your existing bases, then pick the arm length for your reach. Measure from the mounting point to where the device should sit.
Choose the holder for your largest device, and test the whole kit on a short ride before a long trip. A quick check beats losing a phone on the highway.
Final Thoughts
After testing these kits on bikes, trucks, and ATVs, the medium double socket arm proved itself as the reliable core of a RAM system. The best kits held steady through vibration and bad roads, and the arm itself never slipped once tightened properly.
If you mount devices on vehicles, start with the medium arm and a genuine RAM kit that matches your ball size. Pick the holder for your device, mount it securely, and check the knob before every ride. That habit has kept every device of mine safe.





