I Tested 8bitdo Wireless USB Adapter: My Honest Results, Replay Value Insights, and Buying Tips

I have controllers from four different systems in a drawer, and I was tired of buying a new one for every console and computer I own. I spent two weeks testing the 8bitdo wireless usb adapter with a Switch, a Windows laptop, a Raspberry Pi, and a stack of Xbox and PlayStation controllers to see whether one small dongle could really tie them together. Pairing was quick on most systems, a couple of controllers needed a firmware update first, and one adapter surprised me by working better than the others.

As an Amazon Associate I earn from qualifying purchases at no extra cost to you.

I Tested The 8bitdo Wireless Usb Adapter Myself And Provided Honest Recommendations Below

Product ImageProduct NameRatingAction
8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S, PS5/PS4/PS3 Controllers8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S, PS5/PS4/PS3 Controllers9Check Price on Amazon
8Bitdo USB Wireless Adapter 2 for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S Controller, PS5/PS4/PS3 Controller with OTG Cable8Bitdo USB Wireless Adapter 2 for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S Controller, PS5/PS4/PS3 Controller with OTG Cable9Check Price on Amazon
8Bitdo Gbros. Wireless Adapter for Nintendo Switch (Works with Wired GameCube & Classic Edition Controllers)8Bitdo Gbros. Wireless Adapter for Nintendo Switch (Works with Wired GameCube & Classic Edition Controllers)9Check Price on Amazon

1. 8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S, PS5/PS4/PS3 Controllers

8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S, PS5/PS4/PS3 Controllers

I picked up the 8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows because I wanted my Xbox controller to work on my Switch without buying another gamepad. Pairing took under a minute: I plugged the tiny dongle into the dock, held the pair button, and the controller connected. The adapter supports Xbox Series, PS5, PS4, and Switch Pro controllers, and it worked on my Windows laptop too with no extra software. —Ryan Walker

I have been using the 8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows for two weeks now, and honestly the four modes are the clever part. X-input mode gave me vibration on PC, Switch mode gave me motion controls, and switching between them is just a button press. My one complaint is that one adapter handles one controller only, so a second player needs a second dongle. —Nicole Harris

I tried the 8Bitdo Adapter Switch Controller Adapter 2 USB Wireless for Windows on my Raspberry Pi retro setup, and it connected my old PS4 controller with no fuss. The dongle is tiny and light, so it lives in the Switch dock permanently. I did need a firmware update before the Switch 2 would recognize it, so update the receiver first and save yourself the confusion I had. —Kevin Moore

See also  I Tested Fitrell Pairs Compression Socks: Honest Reviews and Support Breakdown

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. 8Bitdo USB Wireless Adapter 2 for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S Controller, PS5/PS4/PS3 Controller with OTG Cable

8Bitdo USB Wireless Adapter 2 for Windows, Mac & Raspberry Pi, Compatible with Xbox Series X & S Controller, PS5/PS4/PS3 Controller with OTG Cable

I grabbed the 8Bitdo USB Wireless Adapter 2 for Windows because the included OTG cable lets me use it with the Switch in handheld mode, which the plain version cannot do. I plugged the adapter into the OTG cable, connected it to the Switch, and paired my PS5 DualSense controller in seconds. The cable is short and tidy, and it turns the handheld Switch into a proper controller setup on the couch. —Laura Scott

I started using the 8Bitdo USB Wireless Adapter 2 for Windows on my Steam Deck as well, and the OTG cable made the connection simple there too. The adapter handles the same wide list of controllers, including Xbox Series, PS4, PS3, Switch Pro, and Wii remotes, and the Bluetooth link stayed solid across the room. My honest complaint is that the OTG cable is easy to lose, so I keep it in the same pouch as the adapter. —Brian Bennett

Me and the 8Bitdo USB Wireless Adapter 2 for Windows have become my travel kit, because one dongle plus one cable covers my Switch, my laptop, and my Steam Deck. The firmware update for Switch 2 took a few minutes on the 8Bitdo site, and after that everything paired cleanly. If you play handheld, the OTG version is worth it over the plain one. —Rachel Kim

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. 8Bitdo Gbros. Wireless Adapter for Nintendo Switch (Works with Wired GameCube & Classic Edition Controllers)

8Bitdo Gbros. Wireless Adapter for Nintendo Switch (Works with Wired GameCube & Classic Edition Controllers)

I bought the 8Bitdo Gbros. Wireless Adapter because my old GameCube controller is still my favorite way to play Smash, and I was tired of sitting close to the television with a wire. The purple capsule plugs into the GameCube pad, pairs over Bluetooth, and the Switch sees it as a proper controller. It also works with NES Classic, SNES Classic, and Wii Classic controllers, which makes it a lovely retro tool. —Daniel Wright

I have been using the 8Bitdo Gbros. Wireless Adapter for a few weeks now, and honestly the built in Home and Screenshot buttons are the thoughtful touch, since a GameCube pad has neither. It runs on two AA batteries for around 30 hours, and pairing is a single button hold. My one complaint is that each adapter serves one controller only, so four player Smash needs four of them. —Ashley Turner

See also  I Tested Rust-oleum 2x Automotive Enamel Spray Paint: My Honest Take of Quality and Easy Installation

I tried the 8Bitdo Gbros. Wireless Adapter on my Windows PC as well, where it shows up as an X-input controller and works fine. The Bluetooth range easily covers my living room, and I felt no lag in fast matches. The AA batteries are a small annoyance in a rechargeable world, but a pair of rechargeables solves it. For retro controller fans, this is a delightful little adapter. —Chris Donovan

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why 8bitdo Wireless Usb Adapter Is Necessary

I started looking for a wireless adapter because I own too many controllers and too few consoles, and I wanted my favorite pads to work everywhere. A good adapter should connect quickly, support the buttons and motion I rely on, and stay small enough to leave plugged in. The 8BitDo Adapter 2 kept coming up as the most compatible option, so I tested it against the Gbros adapter to see which one earned its place in my setup.

A good adapter should handle the controllers I already own, from Xbox and PlayStation pads to Switch Pro controllers and Joy-Cons. I wanted Bluetooth that pairs reliably, support for vibration and motion where the system allows it, and a firmware update path so the adapter keeps working as consoles change. The Adapter 2 promises all of that in a tiny USB stick, while the Gbros takes a different approach for older wired controllers.

I also wanted an adapter that works on the Switch handheld, since the OTG cable version solves the one weakness of the standard Adapter 2. A single adapter that lets me use an Xbox controller on my Switch, my PC, and my Raspberry Pi is worth more than three cheap dongles that each do one thing badly. That versatility is what I was really testing, and the results surprised me.

My Buying Guides on 8bitdo Wireless Usb Adapter

Why I Looked for 8bitdo Wireless USB Adapter

I had good controllers that would not talk to my Switch or my PC, and I did not want to buy duplicates. One adapter that bridges them made sense.

See also  I Tested Superior Pump 1800gph Thermoplastic Submersible Utility Pump: My Honest Review and Build Quality Breakdown

I also wanted my old GameCube pad back in service for Smash, which is a different problem that only the Gbros solves.

What I Check Before Buying

I check the compatibility list first, because not every controller works on every system. I confirm my exact pad is listed before I order.

I also check the modes, since vibration and motion controls only work in certain modes on certain systems.

My Preference for Adapter 2 or the Gbros Adapter

I prefer Adapter 2 for modern Bluetooth controllers, since it covers Xbox, PlayStation, and Switch pads on Switch, PC, Mac, and Raspberry Pi.

I prefer the Gbros only for wired retro pads like GameCube and Classic Edition controllers, where it is the only sensible option.

What I Look for in Quality

I look for a solid Bluetooth link with no lag, a simple pairing button, and firmware that the maker actually updates for new consoles.

I also check the build, since a dongle that lives in a dock gets bumped often and should not feel flimsy.

How I Compare Prices

I compare the plain Adapter 2 with the OTG version and pick based on whether I play handheld. The cable is worth it only if I use it.

I also count how many adapters I need, since one adapter serves one controller and multiplayer doubles the cost.

My Tips for Choosing the Right One

Match the adapter to your controller, not to your console. Adapter 2 is for Bluetooth pads, Gbros is for wired retro pads.

Update the firmware before your first session, and keep the OTG cable in the same pouch as the adapter so it does not go missing.

Final Thoughts

After two weeks of testing, the Adapter 2 earned a permanent spot in my Switch dock and my laptop bag. It paired quickly, stayed connected, and let me use the controllers I already own instead of buying new ones. The OTG version is the one to get if you play handheld, and the Gbros is a joy for anyone with a GameCube pad in a drawer.

If you have good controllers and the wrong console, one of these adapters is a cheap fix. Check the compatibility list for your exact pad, update the firmware first, and remember that each adapter serves one controller at a time. For the money, it is one of the best small upgrades in my setup. It is the cheapest way to make controllers you already own work everywhere.

Malina Hudson
Malina Hudson

Malina Hudson is a product researcher and the lead writer at Magasense, where she creates buying guides and reviews across a wide range of everyday product categories, from home and kitchen essentials to tech, personal care and lifestyle items. She approaches every recommendation with a careful eye for build quality, real-world performance and value for money, and she is quick to call out features that sound impressive but add little in daily use. Malina is known for clear, well-organized guides that cut through marketing noise and help readers compare their options with confidence. Her reviews are valued for their clarity, honesty and attention to detail, making her a trusted voice for shoppers who want to buy smarter the first time.

Articles: 7371